HEATING BOILERS "RUBIN"
Purpose of the development:
Designed for heating homes, cottages.
Recommended application field:
Scope - municipal sphere.
Technical characteristic:
Specifications (depending on model):
- Rated output - 7,5-99 kW
- Heated area - 75.990 sq.m.
- Control range - 40-100%
- Efficiency - 95.0%
- Gas flow rate at nominal output - 0,84-10,8 cbm. / Hour
- Flue gas temperature - not less than 110 degrees C
- Nominal pressure gas - 0,013 (130) kg / cm sq. (Mm v.st.)
- Minimum gas pressure - 0,005 kg / sq cm.
- The volume of water in the heat exchanger - 20-230 l
- Mass boiler - 62-400 kg.
Advantages over analogues:
BENEFITS:
- High efficiency - 95%
- Piezo ignition pilot burner
- Operation at the gas pressure of 0.005 to 0.05 kg / sq cm.
- With high-performance silent micro torch atmospheric burners
Stainless Steel
- Volatility. The natural circulation of water without the pump
- Circuit for hot water
- High reliability and safety in the work through the use of gas automation "SIT"
- Complete the associative safety standards
- Durability. The heat exchanger is made of steel with a thickness of 3 mm.
The development stage readiness:
Introduced in production
Description of the development:
() Boilers are available with hot water loop, or without it. The boilers operate at a low pressure natural gas combusted at atmospheric pressure. Boilers capacity 8-99 kW are available in outdoor performance, productivity and boilers
formance 7.5; 10; 12; and 16 kW are available in wall-mounted.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|