CONTROL SIGNAL EQUIPMENT KSA-15
Purpose of the development:
Control and signaling equipment KSA-15 - stationary apparatus designed for continuous measurement and monitoring of vibration parameters on rotating parts of the machine during its start-up and steady state load.
Recommended application field:
CSA-15 can be used independently, or as part of the aggregate SCADA systems for process automation in transport of oil and gas, energy, mining and processing industries.
Technical characteristic:
Some technical details :
Number Parameter Value Notes
1. Converter type AME -133 eddy current
2 . Number of measuring channels pc.
vibration displacement 4
Axial shift 1
3 . Swipe relative vibro , mm 10 to 250
relative to the initial gap (1,35 ± 0,15) from 10 mm to 125
10 to 75
Axial displacement , mm from minus 1.0 to plus 1.0
From minus 0.6 to plus 0.6
4 . Operating frequency range , Hz 10 to 2000
5 . Basic measurement error ,%, not more than 10
6. Food AC 220V, 50 Hz, 110 VA
7. Generator housing 300h168h94
8. Block switching 525x535x275
9. Weight , kg, not more than 75
Advantages over analogues:
The converter can be installed in explosive areas.
Average lifespan of 10 years.
The development stage readiness:
Introduced in production
Description of the development:
() Control and signaling equipment KSA- 15 is used for measurement, control and alarm setpoints are exceeded levels of vibration displacement and axial shear rotor centrifugal compressor units . CSA -15 is a means of measuring equipment and entered into the State Register of measuring Ukraine - for number 95 - u424 .
The equipment comes in six versions depending on the measurement range and the length of the body with an inductor .
Ingredients:
Number Name Quantity
1. AME -133 converter 5
2 . Vibration displacement unit 4
3 . Axial thrust block 1
4 . Power supply 1
5 . Switching unit 1
functions:
· Measurement and indication on the pointer instrument vibration displacement amplitude values ;
· Measurement and indication on the pointer instrument the axial shift ;
· Signaling of the monitored parameters established threshold ( alarm and warning );
· Fault signal measuring channel ;
· Analog output ( voltage) for connecting devices and analyzers ;
· Mode - continuous , non-stop .
Certif
№ UA-MI/2p-3360-2010
corresponds technical description
Guarantees stable results getting
Possibility of transfer abroad:
Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|