Purpose of the development: Wall heating system (type TERMEH) is designed for economical space heating.

Recommended application field: Energy.

Technical characteristic: Radiant heating system consists of a flat panel electric heaters power of 90 W or 180 powered by 220 V.

Advantages over analogues: 1. The most important advantage of the system - its exceptional efficiency. This is essential for constant growth in electricity prices . Savings are achieved thanks to the original design of the system . Panel heaters - heaters are not standard under the window, they are placed above the floor evenly along the walls of the room , they are mounted primarily on the cold outer walls. Formed near the wall " air curtain ." This thermal insulation tightly envelops the room and prevents moisture walls ( perfect way to get rid of mold and dampness in a cold room ) . Panels provide uniform heat and prevent its loss in the room. 2 . In each room mounted thermostat , with which you can adjust the temperature of air. This can significantly reduce power consumption. 3 . For your heating system to paneled TERMEH - completely safe and does not require repair and conservation. Lifetime - no less than 20 years. Warranty period - 3 years. During the renovation of premises panels are easily demountable. They have an aesthetic look inconspicuous on the walls and do not take up much space. Thanks to the original design of our panels do not spoil the walls behind them are not dust settles . Plates can be mounted on all types of walls, even on wood . 4 . If you intend to build a new home or improve the heating system in homes, offices, shops, cottages, you have to use traditional heating, which uses coal or gas , or agree to establish convection or oil heaters . All this is due to the high cost of a boiler , pipes, heaters , installation and implementation of even the construction of a new boiler room . Payment for heating gas or coal is very high and growing. Convection ( heating elements) and oil heaters are very uneconomical to operate. All point heaters do not have thermostats , keep a constant temperature in the room , regardless of the temperature outside.

The development stage readiness: Introduced in production

Technical and economic effect: The price of equipment installation costs energy costs when it comes to system TERMEH much lower than traditional heating systems. Years of experience has shown that the cost of heating with heat panels 15 - 50% lower compared to coal or gas heating, 40 - 50% compared to the heating elements or heating oil heaters.

Description of the development:
()
Individual panels are attached to the wall in the room directly above the floor and connected to each other as the cubes LEGO, in arbitrary comparisons in such numbers that they provide space heating power . Panel length of 0.5 m (90 watts) or 1 m (180 W) , height 13 cm, thickness - only 1.5 cm 1.5 cm in height legs allow the fixing to the wall panel so that when this space is for air movement between the panels and the wall . The panels are at least 20 years. Low panels never exceeds 90 ° C. This protects against fire and allows you to mount the panel on any wall , including a wooden . Steel body panels covered with powder coating in any color - on request. Thermostat controls the temperature of the panels , which keeps indoor air predetermined temperature (eg 20 ° C) with an accuracy of 1 ° C. Key elements of the system - the heating panel 90 watt (or 180 W ) , combined in a set of arbitrary power needed for heating or additional warm room. Panels are supplied from 220 V through the thermostat. Attached to the plug wire and two-wire thermostat 3 m , depending on the temperature inside and outside , turn on and off the voltage in the set of panels. Thus it is an important component of thermal comfort and reduces the power consumption. Through the use of the thermostat , the average panel run 12 hours per day . In smaller rooms, the thermostat may not apply . The amount of energy required to heat a small bathroom or toilet , small . However, without a thermostat can not be set the desired temperature. If you do not use the thermostat , you must purchase plug cord to connect the set to the mains. The next element of the heating system - CONNECTORS , allowing to connect the panel to set on adjacent walls, fix them in several rows , in particular, place them between furniture . At the joints in the sockets , panels and thermoregulator current must not exceed 10 A. Therefore, one thermostat outlet and can not include more than 20 panels of 90 W or 10 pcs 180 watts. Increasing the number of panels can lead to overheating and burning the wires. The final element is a set of plugs that completes the installation kit. It provides a current of injury . In larger rooms, sometimes you need to install more panels. In this case, an additional element is necessary AMP Z- 2 , which divides them into two smaller groups , which are fed from two different outlets. Both groups of panels in the room controls only one regulator .

Information about newness of the development:

ноу-хау--
1 шт.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Combinated reduction to industrial level
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua