Purpose of the development: Tone generator GZCH-2500 is designed to work as a source of continuous fluctuations when searching for damage to cable lines and determine the depth of power cables with the unit "P-806".

Recommended application field: Control parameters of cable lines.

Technical characteristic: Main technical characteristics GZCH -2500: - Output in a consistent mode, W: not less than 2500 ; - Maximum output load voltage, V: 300 ; - The maximum output current, A: 50; - Frequency of oscillation, Hz: 1024/2048 ; - Modulation frequency in Hz: 1.5-3; - The number of steps to meet the load: 12; - Range of load resistance, Ohm: 0.5 - 150; - Power supply: single-phase AC 220V ± 22V, 50 ± 2G; - Power consumption, W: not more than 3000 ; - Weight, kg: 15 ; - Dimensions, mm: 320x360x200. Main technical characteristics of the P- 806: - The tuning frequency in Hz: 1024-2 and 2048-4; - Limiting sensitivity to the magnetic field at a ratio - signal / noise ratio of 6 dB, mA / m: not more than 50; - Load - headphones resistance, Ohm: 16 - 100 ; - Power supply: Ni-MH 4 AA-size battery voltage of 1.2 V and a capacity of 1.8 A? W; - Nominal voltage, V: 5 ; - Supply Current mA: 30 - 130; - Duration of the battery, h: 15 - 50; - The receiver has traceability battery level input signal value.

The development stage readiness: Introduced in production

Description of the development:
()
Tone generator GZCH -2500 defines the location of the damage and combustion power cable power lines . Operating conditions : - Ambient temperature range from -20 ° C to +40 ° C; - Relative humidity at 25 ° C and 80 % ; - Atmospheric pressure of 650 - 800 mm Hg. Art. In place of operation must not be corrosive vapors of liquids ( acids and alkalis ) . Receiver P -806 is intended for: - To search for tracks, interphase insulation fault location and depth of the high voltage power cables induction method ; - Search for places damaging high voltage power cables acoustic method . When searching for an induction method receiver must be operated in conjunction with a generator of any form of continuous oscillation at 1024 ± 2 Hz and 2048 ± 4 Hz , providing a range of loads from 0.5 to 200 ohms output power of at least 200W (eg GZCH -1000 -2500 GZCH ) . When searching for an acoustic method receiver must be operated in conjunction with a powerful generator voltage pulses of 5 -10kV and a pulse energy of 150 - 1000 J , the following intervals of a few seconds (eg GAUV -5). The receiver is designed for field use in a range of ambient temperatures from minus 20 to plus 40 ° C, relative humidity of 85% and a pressure of 600 to 800 mm Hg . Art.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity
Joint production, sale, exploitation

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua