Purpose of the development: Portable gas leak detector "300" is an electronic gas sensing device with battery and is designed for operational control of the density of connections in the network of natural gas (methane), leak detection in different gases equipment during installation, repair and maintenance work.

Recommended application field: Leak detection in different gas equipment during installation, repair and maintenance work.

Technical characteristic: Battery life - not less than 500 charge / discharge cycles. Detector operated at an ambient temperature of 0 to + 40 ° C and relative humidity up to 90% at a temperature of + 30 °. Overall dimensions of the detector: 190h60h28 mm, weight with battery set - up to 220 g

Advantages over analogues: Detector "300" - a convenient and effective way to improve the safe operation of gas appliances and energy saving. Has a high sensitivity, easy to use and maintain, can be used by untrained personnel.

The development stage readiness: Ready for application

Technical and economic effect: Application effect: a significant decrease in the risk of leakage of biogas and fuel gases. The price of the device is 15-20% less than the price analogs.

Description of the development:
()
Portable gas leak detector "300" identifies the leakage of propane , butane and other combustible gases. Leak detection , simply prepared to work to bring the detector close to the place inspected or spend them slowly along the object ( eg flange ) . After a few seconds when detecting an increased concentration of gas is included Visual and audible alarms . If you find a leak detector includes a clear light and sound alarm " leak." The device also has a high sensitivity mode , in which the levels of inclusion of appropriate signaling halved . The detector is provided by four batteries of general application ( "AA" size ) . At nominal duty cycle ( 5 minutes - working state and 15 minutes - off) , the battery delivers the performance of the detector for at least 30 cycles at room temperature and the total initial charge. Battery discharge below the acceptable level displayed waveguide " BATTERY " . Provides a convenient charging batteries with an external automatic charger through a separate socket in the housing. Detector model "300" is not intended to monitor levels of NIP for working in hazardous environments.

Information about newness of the development:

ноу-хау--
1 шт.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua