Purpose of the development: Designed for control of electric control devices energized tap changer type which carry automatic adjustment factor of transformation of power transformers.

Recommended application field: RPN management of electric transformers.

Technical characteristic: Supply voltage, V: 220 ± 15%. Frequency, Hz 50 or 60. Controlled voltage, V: 100. Controlled current: 5 or 1. Number of inputs current compensation Pieces: 4. Management team, "Setting", "Add", "Reduce", "Switch": 110 or 220 V ~ Dimensions, mm: 160h262h265. Weight, kg: 6. Climatic conditions: UHL3.1, T3.1. MTBF regulator at least 30,000 h. Average lifetime to medium (capital) repair at least 15 years. Mean time to recover no more than 6 h. Average storage time of at least 2 years.

The development stage readiness: Introduced in production

Description of the development:
()
Controller provides the following functional tasks: - Automatic voltage regulation at the substations , as with so smoothly and rapidly changing load; - Adjust the level of the regulated voltage to the load current to one or a group of lines ; - Formation of pulsed or continuous control commands electric RPN ; - Functional testing of electric RPN in pulse mode ; - Group control electric RPN parallel transformers ; - Blocking regulator and alarm when a fault drives RPN ; - Setpoint change voltage from one preselected value to the other external relay signal; - Ban areas external relay control signal; - Blocking at reduced voltage measurement ; - Summation currents up to four lines; - Manual override control commands block for adjustment and for objects with no remote control circuits ; - Submission of control commands to the drive manually ; - Use the controller as a block voltage limit .

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua