Purpose of the development: Turnstile support is designed to provide stability and cargo except in an emergency transportation of oversized cargo by rail.

Recommended application field: Railway transport.

Advantages over analogues: Introduction of the development of distributed allow controlled lateral motion relative to the lower load bearing plates at each turnstile support to ensure its stability under the action of transverse inertia forces and eliminate accidents during transportation of oversized cargo by rail.

The development stage readiness: Ready for application

Description of the development:
()
Novelty: the recess on the underside face of the top plate and the upper face of the intermediate plate of the device ( turnstile support) are designed as cylindrical surfaces kososimetrichnogo curvilinear profile with respect to each other with a radius of curvature that decreases in the intermediate plate and the upper plate increases when moving from vertical longitudinal plane passing through the center of mass of the load . By choosing the profile of the said recesses kososimetrichnogo with variable radius of curvature of the center of mass load deviates in the direction opposite to its displacement in the transverse direction. This compensates the torque acting on the load and thus ensures its stability when the tow platforms tight curves and turnouts . Development proposed in the form of advice and scientific support .

Information about newness of the development:

ноу-хау--
1 шт.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Technological document's sale

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua