MACHINE FOR CRACKING THE WALNUT SHELL - ICE-3
Purpose of the development:
The machine is designed for cracking shells of nuts (walnuts) without preparation and without calibration nut.
Recommended application field:
Agriculture. Food industry.
Technical characteristic:
Specifications:
- Supply voltage 220 V
- Frequency, Hz 50
- Installed capacity up to 65 kW
- Productivity, kg / h 100-150
- Overall dimensions: length - 1300, width - 800, height - 1700
- Weight, kg 120
Advantages over analogues:
advantages:
- On this machine pre-calibration of the walnut is not required;
- Walnut on this machine breaks all;
- The quality of a split walnut is very high;
- The most simple of the machine and the machine control does not require any special knowledge or special training. The machine is operated by one person.
The development stage readiness:
Introduced in production
Description of the development:
() The machine consumes comprises:
- The base or bottom frame ;
- The upper frame ;
- Bin boot ;
- Nuts dispenser ;
- Splitting device;
- Drive ( geared motor ) .
Operation of the machine is as follows : In the hopper is filled with walnut ( uncalibrated ) . Then connect the machine to the network 380/220V/50Gts . Turn the circuit breaker on SHU ( cabinet) - the machine is ready for operation. Press "Start" button on the SHU , it leads to start the motor drive ( gear motor ) . Walnut is dosed individually in roskalyvaetsya Splitting device and nut shells , and then the finished product is poured into the container to slide-ways . The compression ratio is adjusted nut and feeder serving nuts Individually Splitting device is synchronized with the latest in a cycle . Job feeder splitting device comes from a single drive .
Information about newness of the development:
ноу-хау--
1 шт.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|