Purpose of the development: Seedbed cultivator "Baptist" is a multistage tillers intended for seedbed preparation and processing of vapor to a depth of 15 cm

Recommended application field: Agriculture.

Technical characteristic: Parameter name " Baptist" OKP -4H " Baptist" OKP -7H Type guns mounted mounted Tractor class 1.4-2 3 Capacity, ha / h 2.5-4.3 4,4-7,6 Operating speed, km / h 7-12 7-12 Width, m July 4 Depth , cm 15 15 The number of staff , pers. January 1 Dimensions in working condition , mm: - Length 2650 2900 - Width 4250 7200 - Height 1250 1250 Overall dimensions in transport position, mm : - Length 2650 2900 - Width 4250 4250 - Height 1250 2100 Weight, kg 1050 1750

Advantages over analogues: advantages: - Spring stiffness S- shaped struts preplant cultivator selected so that they are vibrated at a frequency which decreases while the effective coefficient of friction of the soil working organs , and therefore , the load on the tractor. Operational data ascertain reduction in fuel consumption of up to 5 l / ha . - Existence of independent rippers to reduce the harmful effects of the tractor wheels on the ground by deep (15 cm ) loosening track wheels. - In working condition top link hitch tractor coupled with a floating mechanism for tracking JRC , which makes it possible to copy a longitudinal relief soil and reduce the load on the tractor . - In cultivator ( cannon ) OKP -7H dropdown poluramy have to swing laterally by 8 degrees. Thereby optimally adapting to cross uneven ground . Technological capabilities and features preplant cultivators " Baptist " allow for the ideal preparation for sowing agrobackground all kinds of crops , especially small seeded .

The development stage readiness: Introduced in production

Description of the development:
()
Cultivator can be used in fields with pretreated background with slope less than 8 °, on soils with a hardness of up to 2.5 MPa and 25% relative humidity ; cultivator tractors with traction following classes : OKP -4H - drawbar category 1,4 ... 2 ( MTZ-80 , JUMZ -6L ) OKP -7H - drawbar category 3 ( T150K , HTZ -160 , HTZ -170 , MTZ- 2112) The device . Cultivator consists of a frame (OCF -4H ; OKP -7H ) and two half-frames laid out ( OKP -7H ) spatially tubular structure with power front beam. On the frame and half-frames are mounted in four rows S-shaped spring strut with podpruzhinnikami at the bottom of which are attached Sweeps rippers or chisel . When working cultivator based on height-adjustable support wheels . Security bars on the frame and half-frames are fixed with adjustable vertical boards dumping mechanism that protects against overload. At the rear of the cultivator mounted slatted twin rollers . Roller position relative to the surface of the soil is regulated by a spring-loaded lever mechanism . Hoe also has independent rippers soil compaction on the trail of tractor wheels . Cultivator mounted with tractor attachment means consisting of JRC and the swinging rack. In cultivator OKP -7H has a hydraulic system for opening / Articulation .

Information about newness of the development:

ноу-хау--
1 шт.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua