Purpose of the development: The stand is designed for acceptance and maintenance testing of electrical protective equipment used in electrical installations.

Recommended application field: Energy.

Technical characteristic: Parameter Value Mains voltage AC 220 ± 10% Frequency , Hz 50 ± 1 Power consumption, kW , not more than 0.9 Operating mode " 100 V " " 3kV " " 15KV " " 100kV " Rms value of the maximum test voltage , kV 0,1 3 15 100 Reduced measurement error voltage ,% ± 3 Seats for testing 1 4 4 1 Max . measured leakage current mA Not measured 7.6 7.6 20 BU Weight , kg, not more than 18.5 Mass of the high voltage source NRZ -50 , kg , not more than 42.5 Mass of the test bath , kg, not more than 10 BU Dimensions , mm 415x220x360 Overall dimensions of the test bath mm 730x1060x450 Overall dimensions of the high voltage source NRZ -50 mm 365x670x295 An average lifetime of 10 years Recommended area for stand , 3x5 m

Advantages over analogues: Equipment stand can be used as a test plant for high-voltage insulation products (cables, insulators, etc.) AC voltage.

The development stage readiness: Introduced in production

Description of the development:
()
Stand allows testing : - Rubber insulating gloves; - Dielectric rubber boat and galoshes ; - Hand tools with insulated handles ( screwdrivers , pliers , pliers , etc.) The operating conditions correspond UHL4 GOST 15150-69. completeness: The control unit 1 Test bath consisting of: 1 (set ) Pump 1 Gun set of water 1 Water Tanks 2 A high voltage unit 50 , NRZ 2 Red Lantern 1 trailer 1 Power cable 1 1.75m High voltage wire 1 1.75m Ground wire 3 1.75m Safety fuse 5x20 2250 V, 1 A Safety fuse 6x30 2250 V, 5 A Plug the external connections XT5 1 Manual 1 , Passport

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua