CONTROLLER MCL 5.8
Purpose of the development:
The controller is used for the automated transfer of metering data.
Recommended application field:
Different sectors of the economy (household sector, energy, etc.)
Technical characteristic:
- Four-frequency internal GCM / GPRS modem;
- LED indication of signal strength GCM network and modem status;
- The controller can be equipped with an internal battery capacity of 450 mAh;
- Mounted under the protective cover of the contact pads on the counter or a 35 mm DIN rail;
- The controller is powered by the internal power supply DC
+5 V or an external power supply AC 90 ... 264 V;
- Operating Temperature -30 ... +50 degrees. C.
The development stage readiness:
Introduced in production
Description of the development:
() The controller is used for automated data transmission of electricity meters , heat and other energy resources in remote data collection center via GSM / GPRS networks. The controller is adapted to connect to external systems .
Interfaces read data ( findings ) :
- Current loop (up to three measuring devices );
- RS485 ( up to 32 gauges );
- RS232 ( one meter ) .
Interface for connecting external systems :
- Input interface loop (Clin).
Interface for local readout and configuration :
- RS232 - for connecting a computer or other device that initiates the polls .
Messaging:
- In case of power failure, power on the subject at the center of this data collection message is sent .
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|