MICROOHMMETER TSS4105
Purpose of the development:
Microohmmeter TSS4105 is designed to measure the electrical resistance of the DC components of electrical circuits which are not energized.
Recommended application field:
Electric power.
Technical characteristic:
- Display of measurement results microhmmeter - alphanumeric display on the LCD ( LCD display ) , the robot interactively .
- Power microhmmeter - AA size batteries voltage 1.2 V - 8 pcs.
- Measuring ranges microhmmeter :
10 mkOm to 3 milliohms ( Limit 3 milliohms );
from 1 to 300 mW ( 300 mW limit );
from 0.1 to 50 ohms ( Yield 50 ohms).
- Modes microhmmeter - automatic or manual.
- Automatic operation - one measurement after tapping the " Measurement " .
- Manual operation - continuous measurements for holding the button "Measure " button for manual selection of measuring range 1-300 mW with a limit of 300 mW or 0.1-50 ohms with a limit of 50 ohms.
- Manual operation microhmmeter preferred for measuring the resistance of the inductive nature . Continuous operation microhmmeter manually defined electric battery capacity .
- Accuracy class according to GOST microhmmeter 2.5 8.401 " Accuracy classes of measuring instruments. General requirements . "
- When measuring the resistance of the inductive nature with a time constant of 50 ms to be within the error of acceptable relative basic error .
- Power consumption current Microohmmeter battery in manual mode is not more than 0.25 A.
- The current in the circuit resistance measurement :
at the limit of 3 mW - 5 A, a current pulse duration of 0.3 seconds ;
at the limit of 300 mW - 50 mA DC ;
at the limit of 50 Ohm - 5 mA DC .
- Dimensions - 230 mm x 140 mm x 58 mm.
- Average life microhmmeter 10 years.
Advantages over analogues:
- The newest multifunctional microohmmeter TSS4105 with digital readout;
- Automatic selection of the measuring range.
The development stage readiness:
Introduced in production
Description of the development:
() Microohmmeter can be used for the measurement :
- Transient electrical resistance high-voltage switches and circuit breakers ;
- Electrical resistance of brazed , welded and bolted connections ;
- The electrical contact resistance and resistance ground connection of the grounding circuit devices;
- Resistance tires, wires and cables ;
- Resistance of windings of electrical machines.
Microohmmeter provides:
- Charge the battery from the power supply ;
- Light indication of the process and the degree of battery charge ;
- Automatic selection of the measuring range ; in manual mode allows manual selection of measuring range of 300 milliohms or beyond 50 ohms ;
- Automatic disconnection from the power supply when the voltage drops below 8 V supply and (or) after (90 - 120) to the end of the measurement ;
- Storage of the results of last 20 measurements.
Operating conditions ( climate impacts )
- Ambient air temperature of minus 10 * C to 55 * C;
- Relative humidity 90 % at 30 * C.
Degree of protection in accordance with GOST 14254 " Degrees of protection provided by enclosures (code IP)» for microhmmeter - IP42.
Information about newness of the development:
ноу-хау--
1 шт.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|