Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

CURRENT CONTROLLER FOR HIGH-POWER PLASMATORCH RT-200


Purpose of the development: Regulators current RT-200 are designed for control and power overhead electric plasma torches DC nominal power of 200 kW.

Recommended application field: The power supply system.

Technical characteristic: Open circuit voltage of not less than 1200 V. Sampling point of maximum power: 400 A, 540 V. Rated power: 200 kW. Output current ripple, not more than 1%. Maintain the accuracy of the load current, not more than 1.5%. The rise time of the load current during start-up of the plasma torch, no more than 15 ms. Down-slope time when disconnected: 1-2 ms. Efficiency in nominal operation, not less than 96%. Mode of operation: Continuous. Ingress Protection: IP54. Dimensions: 600x600x2100 mm. Weight, not more than 222 kg. Control: local control / external management. Maintainability, the average recovery time: 3 hours. Resource, not less than 10 thousand. Hours.

The development stage readiness: Ready for application

Technical and economic effect: Due to synchronized nesinfaznomu management currents of individual modules are displaced in time, which provides improved power parameters as input and output of the current regulator. Simultaneous use of synchronous nesinfaznogo control and high energy conversion drastically reduces the parameters of the output filters, to realize high performance mining regulator and control signals to achieve optimal transient under perturbations in the load.

Description of the development:
()
In the current controller PT-200 power conversion occurs at a frequency of 20 kHz. In order to construct controllers using a modular principle, the basis of the power modules are IGBT transistors. Application of a modular principle allowed to evenly distribute electrical and thermal loads between the structure nodes, thereby reducing the energy density of the heat and to simplify the design of the controller. Controlling the amount of output current and the control parameters of electric power at the outlet and inlet of the RT-200 is carried out both in local control, and remotely.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Technological document's sale
Joint production, sale, exploitation

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: