MAGNETODYNAMIC VACUUM SYSTEM FOR INJECTION COMBINED LOW PRESSURE
Purpose of the development:
- Preparation of alloys with melting alloy components and stirring the alloy;
- Heating and temperature control of the liquid alloy with its electromagnetic mixing;
- Vacuum refining of molten alloy with its electromagnetic mixing;
- Modification of the alloy with its electromagnetic mixing;
- Adjust the software fills the alloy into a mold under the influence of electromagnetic pressure;
- Crystallization of the casting under the combined effect on the alloy crystallizes electromagnetic and pneumatic pressure;
- Temperature control of the molten alloy in the crucible during solidification of the casting.
Recommended application field:
Foundry.
Technical characteristic:
Useful capacity of crucible, kg: 400;
performance by pouring into a mold (metal flow) in kg / s: not less than 6;
maximum metal temperature, ° C: 750;
electromagnetic power system is in thermal kW: 13;
vacuum to work, kPa (mm. Hg. v): 0.133;
the maximum air pressure kPa (kg / cm) 50 (0.5);
maximum electromagnetic pressure, kPa (kg / mm): 20 (0.2).
The development stage readiness:
Introduced in production
Description of the development:
() Installation is equipped with a processor to control and regulate the parameters of technological processes.
Structure of the installation: a crucible; circular horizontal channel; camera; magnetic inductor; inductor coil; work area; of metal wire; the area of influence of the electromagnet; liquid melt; crystallizer; solidified casting.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Licence's sale Combinated reduction to industrial level
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|