HOT AIR GENERATORS. MODEL GS 130 ... 2000 KW
Purpose of the development:
This category of solid pellet boilers would be the best one for you, if the room is not equipped with central heating. These boilers, hot air generators can be run in operation as required.
Recommended application field:
Different applications where there is no possibility to install a central heating system.
Technical characteristic:
Technical features:
Type "Marine" three-ways smoke boilers with water production for heating; Boilers shell in steel; Doors for internal inspections and boiler cleaning; Cast iron burner with mechanical feeding system; Cylindrical combustible feeding hopper with mechanical stirrer; Fire fighting system in the hopper; Variable speed screw for automatic feeding; Primary and secondary combustion air system; Voltage: 400 V.
Features:
Key:
Manufacturer - D'Alessandro Termomeccanica
Country of origin - Italy
Rated power - 30.0 (kW)
Power control, from 50.0 (%)
Power control, to 100.0 (%)
Fuel Type - Solid
Solid fuels - Chips, Pellets
Solid fuel consumption - 7.13 (kg / h)
The volume of bunker fuel - 0.48 (cu. M)
Efficiency - 86.0 (%)
Appointment boiler - Single-circuit
Installation method - Outdoor
Type of furnace - Closed
Downloads fuel per day - 1 (time / day)
Heat exchanger material - Steel
A method of exhaust - Chimney
The minimum temperature of the flue gas - 150.0 (deg.)
The maximum flue gas temperature - 230.0 (deg.)
Weight - 400.0 (kg)
Warranty period - 12 (months)
Heating:
Maximum operating pressure of the heating system - 3.0 (bar)
The minimum temperature in the heating mode - 40.0 (deg.)
The maximum temperature in the heating mode - 90.0 (deg.)
Electrical parameters:
Mains voltage - 220V ~ 240V
Rate - 50.0 (Hz)
Power consumption - 860.0 (W)
Overall and mounting dimensions:
Entrance to the heating system - 1 1/2 "
Return from the heating system - 1 1/2 "
Additional Features:
Frost protection - Yes
The development stage readiness:
Introduced in production
Description of the development:
() OPTIONS:
- electronic control panel for automating the ignition, combustion and the modulation of support for models CSA 30-100
- electronic board (as described above) with lambda sensor models CSA 30-100
- electro-panel models CSA 130-2000
- electromechanical board for CSA 130-2000 mod. boiler;
- electromechanical-electronic combined control board for combustible automatic ignition, fire maintenance and modulation for CSA 130-2000 mod. boiler;
- electromechanical-electronic combined control board (as specified above) with lambda sensor control device for CSA 130-2000 mod. boiler;
- ashes extractor device;
- refractory panels into combustion chamber;
- turbolators for heat maintenance in the tubes nest;
- automatic combustible feeding system supplied with electric board and min / max screw gauges on the hopper;
- kit for sanitary water production (efficiency output: from 20 to 33 kW; complete with exchanger plates, pump circulation, flow switch and three way valve);
- rotary valve (to prevent smokes return into the hopper);
- tube nest pneumatic cleaning system;
- multi-cyclone for dust laying in the flue (flue and connections excluded).
Information about newness of the development:
there are Ukrainian patents -- 1 items
corresponds technical description
Conforms to technical characteristic
Photo
Country
Italy
For additional information turn to: E-mail: gal@uintei.kiev.ua
|