SCALPERATOR СКО
Purpose of the development:
Scalperator CKO is designed for precleaning - removing large impurities and litter from the grain. Used in elevators and barnyards.
Recommended application field:
Agriculture.
Technical characteristic:
Performance, up to t/h 100 200
Installed capacity kW 1,5 4,0
The sieve drum diameter, mm 900 1260
Number of sections, pcs 2 2
Aspiration air consumption, m3/h 4000 5500
Weight, kg 2050 2400
Advantages over analogues:
1. High process efficiency due to the large screening surface area;
2. Common stamped canvases are used as sieves and are installed and secured on the drum without attaching the frame or making any other preparations;
3. Metal-intensive durable design;
4. The drum angle adjusting widens the scalperator’s potential;
5. Operational safety;
6. Use of components from leading European manufacturers.
The development stage readiness:
Tested experimental exploitation order
Description of the development:
() The raw material enters the drum, the rubbish is divided when the grain is passing through the drum sieves and later is overtailed from the cylinder. The scalperator (precleaner) is necessary for normal dryer’s operation to prevent clogging and reduce the energy consumption that is consumed for drying the product, and also for selection of random items that can cause damage to vehicle equipment. The diameter of sieve perforations depends on the treated grain, its humidity and type of rubbish removed. If necessary, the first sieve may be used to remove fine contaminants.
Scalperator can be equipped with a pneumatic separator (aspirator) in two versions: an open cycle air BCH or closed circuit BCЗ, which is mounted on the separator following the LUCH ЗСО principle.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|