ASPIRATION COLUMN KAO
Purpose of the development:
Aspiration column KAO is intended for cleaning the grain from impurities, differ by aerodynamic properties. It is applied at barn floors, elevators, mills, groat-shops and feed mills.
Recommended application field:
Agriculture.
Technical characteristic:
Model КАО-1
Performance up to, tons/hour 12
Air flow to aspiration, m3/hour 6000
Installed capacity, kW 0,36
Overall dimensions, mm
length 680
width 990
height 2610
Advantages over analogues:
1. High technological efficiency;
2. Qualitative cleaning of grain from light impurities due to shaking chute, providing uniform distribution of grain over entire length of pneumatic separating channel;
3. Present ability to regulate a cross section and shape of pneumatic separating channel;
4.Usage of components provided by leading European manufacturers.
The development stage readiness:
Tested experimental exploitation order
Description of the development:
() Working principle: Parent grain enters the receiving chamber, and then to shaking chute that aligns the grain layer over the entire length of the channel pneumatic separating channel. A movable wall in the lower part of the column is set so that the grain layer down from the shaking chute can be almost horizontal, which contributes to the optimum conditions of pneumatic separation. Light impurities are rising up along through the channel with the air entering the suction system and the cleaned grain is output through the outlet.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|