Purpose of the development: Machines are designed for cleaning the surface of grains of mineral impurities, partial removal of barbs, the embryo and torn envelopes. They are used in grain-cleaning units for the preparation of grain mills to grind.

Recommended application field: Agriculture.

Technical characteristic: Model МБО-3 МБО-6 МАО-3 МАО-6 Productivity, kg/h 3000 6000 3000 6000 Lower ash content of grain,% 0,02-0,03 0,02-0,03 0,03-0,05 0,03-0,05 Air consumption aspiration, m3/h 100 300 100 300 Installed capacity, kW 3,000 11,00 5,50 11,00 Weight, kg 275 630 315 670 Overall dimensions, mm length 1100, 1400, 1100, 1400 width 400, 510, 400, 510 height 1300, 1620, 1300, 1620

Advantages over analogues: 1. Metal-intensive and sturdy construction; 2. High efficiency and reliability (working parts coated with wear-resistant coating); 3. Low specific power consumption; 4. Small dimensions; 5. Easy to operate and maintain; 6. Possible to install a rotor with whips and a sieve frame (MBO -3/6) or a rotor with abrasive discs and a sieve frame (MAO -3/6); 7. Rapid change of the rotors, as they are interchangeable; 8. Components from leading European manufacturers; 9. Bridge bearings protected from dust and thus greatly increase the overhaul interval of the machine.

The development stage readiness: Introduced in production

Description of the development:
()
Hulling machine consists of a frame, drive and chassis which can be mounted rotor with whips, and sieve сlamping ring (IBO-3/6), rotor with abrasive discs and sieve сlamping ring (MAO-3/6). These working bodies are interchangeable, allowing dependent on the machines in the scheme of treatment for each batch of grain to pick up the most efficient сompletion.Grain enters the machine through the suction intake and processed as a result of interaction with the working bodies and due to friction between them. Refined grains derived from the machine through the exhaust pipe, and the waste is removed through the bottom of the funnel for dust.

corresponds technical description
Guarantees stable results getting

Possibility of transfer abroad:
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua