Purpose of the development: Designed for efficient heating of the heat transfer fluid through the net conversion of solar energy into thermal energy.

Recommended application field: Natural coolant circulation system for hot water supply of municipal, industrial, food, agricultural and recreational sports facilities.

Technical characteristic: Technical characteristics: - Collector aperture area, m. - 1.5; - Working pressure, MPa - 0.7; - Coolant - water; - Performance hot water 80grad.S with temperature (average) l / day - 150; - Operating temperature of the coolant degrees C - 70-80; - Overall dimensions, mm width - 960; length - 2250; height - 1620; mass in kg - 79.

The development stage readiness: Introduced in production

Description of the development:
()
The principle of operation of the system is to convert solar radiation energy into thermal energy from the coolant and the subsequent accumulation of heat transmission to the user for further use. The installation includes a solar collector, storage tank (BA) with make-up tank, circulating piping hot and cold water, stand for the collector. To ensure the thermosiphon circulation storage tank located above the solar collector. BA filling with cold water from the water supply system through the make-up tank, which is set Shap float-valve. Warmed to a specified temperature, the water enters the top of BA and forms a layer of hot water. Selection of hot water is heated from the upper most layers of the tank. In the selection of hot water from the tank system replenished water system is replenished with water from the make-up tank. Unit can be mounted on the ground and on the roofs of buildings and structures as flat and pitched. When mounting the installation on flat surfaces used stand, exhibited at the optimum angle. Stand legs fixed to the surface of the anchor bolts. When installing on pitched roofs stand spacers are removed, and the installation of the support frame is mounted through spetsianye holes in the frame. To start the work of the installation, you must connect it to the water system and to monitor the filling of air from the system. Air is removed through the tube at the top of BA and exiting in the make-up tank. In potsesse operation is necessary at least once a month the front layer of polycarbonate, remove dust and dirt. Upon the occurrence of freezing temperatures in the autumn and winter should be drained from the system. Never leave a solar collector filled with water at negative temperatures.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua