WELDING TRACTOR GENERATOR PTO AGROWELD ARC400TDC (10 KVA ~ 3F, WELDING CELLS SINCRO)
Purpose of the development:
PTO generator is designed for installation on all models of tractors, which are suitable for the characteristics.
Recommended application field:
Tractor unit for use on large farms and farms.
Technical characteristic:
Number of phases 3
Rated power (phase 1) 4000 VA
Rated power (3-phase) • A 10000
Rated voltage (3-phase / 1-phase) 400 V / 230 V
Rated current (phase 1) 17.4 A
Rated current (Phase 3) 14.4 A
50 Hz
Synchronous Generator
Reducer gear
The amount of oil in the gearbox 0,7 l
Speed ??V.O.M. tractor 430 rev / min
Recommended engine power 70 hp tractor (51.5 kW)
Power PTO hp tractor 40 (29.4 kW)
Protection against residual current +
Surge Protection +
Protected outlet 3f ~, 1f ~ on 1 piece
Welding current 400 A
Open circuit voltage 70 V
Operating voltage welding current 21.6 - 36
Working hours 35%
The strength of the PTO mode welding of 30 hp (22 kW)
Panel display parameters of the unit U-voltage, I-current, P-current H-frequency, hour meter
Enclosure protection IP54
Protection outlets IP44, 16A
Advantages over analogues:
To protect the tractor alternator from dirt, dust, moisture, you can buy a case. Case is made of high quality PVC fabric density of 630 g / m by the Belgian company "Sioen".
There is the possibility of tailoring with transparent elements and application of the company logo.
The warranty for a high power device is 12 months.
The development stage readiness:
Ready for application
Technical and economic effect:
Key features and characteristics of the tractor unit as follows:
three phases;
generator power PTO - 4000 · A (Phase 1), VA 10000 (3-phase);
voltage - 230 V (phase 1), 400 V (3-phase);
Tractor current generator - 17.4 A (Phase 1) 14.4 A (3 phase);
It is a synchronous generator;
There are preinstalled surge protection and residual current;
Tractor unit 1 is equipped with a secure outlet for 3-phase and 1-phase 1;
panel display shows the most important parameters of the unit - voltage, current, current and frequency;
generator is equipped with an hour meter;
the device is placed on the qualitative frame of solid steel;
protection enclosure - IP54, installed socket - IP44, 16A;
Description of the development:
() Tractor unit AgroWeld ARC400TDC - it is high-yield electric PTO of the tractor, which is equipped with a welding unit Sincro.
Options Sincro welding module are:
welding current is 400 A;
open circuit voltage of 70 V;
welding voltage (working nominal) - 21.6 - 36;
PTO power mode welding - 30 hp (22 kW).
The parameters of the tractor, which will be mounted PTO generator are:
PTO speed - 430 rev / min;
motor power should be between 70 hp (50.5 kW);
PTO power - 40 hp (29.4 kW).
corresponds technical description
Guarantees stable results getting
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|