Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

MULTIGRADE HIGH EFFICIENCY LIQUID HEAT INSULATION "ALLISOL"


Purpose of the development: Coatings, insulating ALLISOL used in industrial and civil construction, transportation construction, oil and gas sector, the energy sector, on any objects, in t. Ch. Home where a significant reduction of heat loss is required. It operated in weather conditions of all macro-climate regions, types and categories of accommodation atmosphere according to GOST 15150-69.

Recommended application field: Industrial enterprises.

Technical characteristic: Purpose - Coatings, insulating Flow rate - 1.0 liters / m2 at a thickness of 1 mm. White color The appearance of the dry coating - After drying, the surface should be smooth, homogeneous, without extraneous inclusions and stains. Solvent - Solvent (oil, coal), xylene. Shelf-life Unlimited The thickness of a single layer of dry film thickness - 0.5 mm Recommended coating thickness - not less than 1 mm Dwell time between coats - 12 hours Staining of protective and decorative coatings - borne coatings only, drying time before applying ALLISOL® at least 12 hours. Drying time at temperature: - 30 * C - 24 hours. - 10 * C - 18 hours. + 20 *С - 12 hours. + 60 * С - 8 hr. Temperature resistance coverages - from -60 ° C to + 250 ° C Adhesion -0,5-1 score (GOST 15140-78) Thermal conductivity - 0.076 W / m * K Reflecting UV rays - 95% The density of the composition at 20 ° C - 500 kg / m3 medium temperature of the substrate - from -35 ° C to + 50 ° C Packaging - 20 l. (Metal. Packaging)

The development stage readiness: Introduced in production

Description of the development:
()
Technological process of thermal insulation coating based on a special blend of "ALLISOL" consists of the following series of operations performed: eleven. Surface preparation for the application of thermal insulation coating; 12. Preparation of a working composition for application; 13. Application of shielding; 14. Layered coating drying; 15. Quality control of shielding; 16. Final exposure shielding prior to commissioning. 2. When carrying out thermal protection in the winter outdoors, it is necessary the construction of sheds or shelters to protect against rain.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: