Purpose of the development: BOM generator is designed to be mounted on any tractor models that are suitable for the characteristics.

Recommended application field: Tractor unit for use on large farms and in farms.

Technical characteristic: Key: Number of phases 3 Current frequency 50 (Hz) Additional characteristics: Manufacturer AgroWeld Number of phases 3 Rated Power (Phase 1) 4000 V • A Rated power (3-phase) • A 10000 Rated voltage (3-phase / 1 phase) 400 V / 230 V Rated current (1 phase) 17.4 A Rated current (Phase 3) 14.4 A Current frequency of 50 Hz Synchronous Generator Reducer gear The amount of oil in the gearbox 0,7 l Rotational speed V.O.M. tractor 430 rev / min Recommended tractor power 70 hp engine (51.5 kW) Power PTO tractor 40 hp (29.4 kW) Protection against residual current + Surge Protection + Secure socket 3f ~, 1f ~ on 1 piece Welding current 400 A Open circuit voltage 70 V Operating voltage welding current 21.6 - 36 Working time 35% PTO strength of the weld time of 30 hp (22 kW) Unit parameter display panel U-voltage, I of-current, P-current, H-frequency, hour meter Protection IP54 housing Protection IP44 socket, 16A Parameters Sincro welding module are: welding current is 400 A; open circuit voltage of 70 V; welding voltage (working nominal) - 21.6- 36; PTO power welding operation - 30 hp (22 kW). Tractor parameters to which the PTO generator will be mounted as follows: PTO speed - 430 rev / min; motor power should be between 70 hp (50.5 kW); PTO power - 40 hp (29.4 kW).

Advantages over analogues: The main features of the tractor unit are: three phases; BOM generator output - 4000 V · A (Phase 1), V · A 10,000 (3-phase); voltage - 230 V (phase 1), 400 V (3-phase); tractor Generator Current - 17.4 A (Phase 1) 14.4 A (3-phase); generator is synchronous; have preinstalled protection against changes in voltage and residual current; tractor unit is equipped with a 1-protected socket for 3-phase and 1 phase 1; display panel shows the most important parameters of the unit - voltage, current, current and frequency; generator is equipped with an hour meter; the device is placed on qualitative frame of solid steel; protection of the enclosure - IP54, installed outlets - IP44, 16A.

The development stage readiness: Introduced in production

Description of the development:
()
Tractor unit AgroWeld ARC400TDC - is highly productive electric power take-off shaft of a tractor, which is equipped with a welding unit Sincro.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua