NEW LUMINOMETER LUMITESTER PD-30 IN A PROTECTIVE COVER
Purpose of the development:
For the production of monitoring the production environment using a simple, compact and affordable PD-20 luminometer. The device is designed to simplify the work in the HACCP system.
Recommended application field:
Medical, laboratory tests.
Technical characteristic:
Detection limit - 10-15 mol / ATP / study
Measuring time - 10 seconds
The measurement result - in RLU - Relative Light Units (relative light units)
Number of memory cells - 2 000
Monitor - LCD Monitor
Data transmission - via USB cable
Power supply - 2 batteries, size AA
Dimensions - 65 x 175 x 32 mm
Weight - 235g (without batteries)
Scope of delivery - Protective case, 2 AA alkaline batteries, cleaning brush, tape, quick reference guide
Advantages over analogues:
Higher sensitivity due to change not only the ATP and AMP bacterial products. Speed. Check the cleanliness of the surface and get the result can be as little as 10-20 seconds. The low limit of detection (200 RLU).
The development stage readiness:
Introduced in production
Description of the development:
() How to conduct a bacteriological examination by a wedding?
1. Remove the tube from the swab stick (orange holder). Wet the tip of the swab with tap water.
2. Take flush with the surface under study by a swab.
3. Place keeper inside the main tube. Push the keeper to break the capsule in the tube.
4. Shake the tube several times to the liquid reactant, which remained in the capsule, was in part a test tube and dissolved the reagent contained in a tube.
5. Insert the tube into the measuring LuciPac Pen capsule luminometer Lumitester PD-30. Close the cover of the measuring chamber.
6. Press the ENTER ( "ENTER") button on the keypad to start the measurement. The result of measurement is displayed after the countdown.
7. Remove the tube LuciPac Pen from the measuring chamber for the measurement is complete.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|