Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

ULTRASOUND SYSTEMS FOR AIR HUMIDIFICATION TYPE TM "VDOH-NOVA"


Purpose of the development: The system channel humidification Breath Nova Air is designed specifically for installation in the intake vents to create the optimum relative humidity in the premises. It is also possible to apply for direct humidification of residential and commercial indoor air.

Recommended application field: The inhalation humidifier Nova is designed to maintain a relative air humidity: - ventilating air supply in the residential, commercial, public and industrial premises; - central air conditioning preparation and submission of the air; - food and industrial climate chambers - processing, storage and maturing of products; - warehouses and industrial buildings; - luggage storage and processing.

Technical characteristic: - the diameter of mist particles. m. 15; - productivity grams of water per hour. 1800/3000/6000/12000/15000; - dimensions humidity module (mounted installation) mm. LxWxH from 380h165h300 or more (depending on the type of performance); - overall dimensions of the housing LxWxH mm. by 520h200h300; - body material - stainless food (AISI 304) steel (or polyethylene food); - voltage Power Module humidification (located in the camera) In. 36 (+ 48V.); - voltage Module supply humidifier (located outside the chamber) V. 220; - built-in protection module humidity; - operating Temperature Humidity Module 1 gr.S. - 50 gr .; - operating Temperature Humidity Module 1 gr.S. - 50 gr .; - operating relative humidity humidity module - up to 100% .; - operating Relative Humidity Module supply - 70% .; - type humidity module - transformer rectifier switching keys; - The number of radiating ceramic discs - 6/10/20/40/50; - W 190/280/580/1100/1250 power consumption (depending on the type of performance). - the volume of pumped air cubic meters 250; - the length of the cord Module moisturizing power of 5 m;. - power Module dimensions mm. 200 X 170 X 200; - the mass of humidity module, without water, from 5 kg. with 9 kg of water. (Depending on the type of performance); - the diameter of the nozzle water supply - 1/2; - the diameter of the air supply channel mist (air intake) mm. - 100/125 / to 150, - water supply system - a built-in mechanical valve; - operating mode setting time seconds. - Less than 30; - system flushing tank module humidity (water drain), an emergency overflow of water; - optional. humidity controller with remote sensor of the capacitive type humidity. Manages the work of the humidifier on a user-defined boundaries of moisture. Has self-powered, sensor cable - 5 m., The power supply control cable uvlazhnitelya- 2 meters.

Advantages over analogues: 1. The quality of generated mist - very small (1-5 mm.). Ultrasonic humidifiers air form water vapor - mist that evaporates and mixes well with air premises. Fog well volatile and far throughout the room space, uniformly wetting him. Unlike moistening nozzles practically eliminates the need for mixing (Irrigation) cells, or their size is much less. 2. The uniform distribution of humidity humidifier "Breath-Nova" on the entire volume premises. Good quality spray drift, its "volatility" for accurate maintaining moisture throughout the room (chamber). 3. Low power consumption about 90 watts. per liter of spray water. Unlike heating steam humidifiers, power consumption is lower in the 8- 9 times. The steam humidifier, for the formation of one kg. couple (by boiling), you need 850 watts. electricity. 4. Have a high response speed of fogging on a signal from the humidity controller. Good handling and precision. As with most unlike steam humidifiers vaporization lag and instability that leads to condensation and waterlogging - dew formation. Systems of nozzles may not work well under transients process capability, "dripping" of water and others. 5. Good operated at low temperatures from +1 gr.S. in refrigerators. 6. No hidden costs and charges. All industrial ultrasonic humidifiers "Breath-Nova" have basic equipment and options. The basic package includes all the necessary modules. 7. Humidifier ergonomic and virtually silent, observed as offices. ( at Unlike steam and disk, which often "buzz"). 8. The humidifier is stable in operation and normalized form a predetermined amount of water mist. 9. The module power supply and control of the humidifier versatile. It provides protection humidifier from the "emergency mode", the humidifier from the work of the external controller signal humidity. 10. The requirement for water treatment is strongly recommendation, but not critical. at work on neobessolennoy ( "hard") water in an ultrasonic humidifier is no "Emergency" situations. Unlike spray humidifier high-low pressure (when tophus "hardness" of water in the hole of the nozzle), in which there is "dripping water" and as a consequence of damage of storage products, horticultural products, paper. 11. The cooling effect of air at elevated temperature in the summer air (adiabatic cooling). 12. ALWAYS available consumable items - emitting ceramic membrane. Easy operation and maintenance.

The development stage readiness: Introduced in production

Description of the development:
()
Humidifier Breath Nova TM forms the ultrafine water mist with high quality and speed of propagation of evaporation, it Electrical safe to use, adapted for mounting in ventilation ducts of different configurations and sections, reliable, has low power consumption. The system is modular, almost silent, compact, easy to use. It allows you to evenly moisten the air in all rooms. Also included is a remote control unit and maintain a capacitive humidity sensor that automatically maintains the humidity of the air. Mounting TM humidification systems Breath Nova CG is produced by "tapping" in the system of forced ventilation (for channel humidification) forces installers or install it in a room in the area of direct air humidification - the so-called "direct" moisturizing.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Realization of finished commodity
Joint production, sale, exploitation

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: