SOLID FUEL BOILERS WITH FUEL SUPPLY MECHANIZED SYSTEM
Purpose of the development:
Solid fuel boilers with mechanized fuel supply and processor management mode of combustion are used to heat domestic hot water, industrial and other premises, as well as for the preparation of hot process water.
Recommended application field:
Industrial and heating boilers, heating individual buildings ranging from 8,000 to 30,000 square meters.
Technical characteristic:
Type of boiler - Hot water, mechanized fuel supply, drum, fire-tube, three-way
Rated power, kW - 850
Power control range, kW - 350 ... 930
Heating area, m2 - 3500 ... 10000
The fuel used - Tyrsa, Stipa pellets, chopped wood
Efficiency,% - 85 ... 88
Water temperature range, ° C - 70 ... 105
Maximum water pressure in the boiler, MPa (kgf / cm2) - 0.4 (4), special. zakaz0,6 (6)
Pressure drop in mbar - 40
Furnace size mm
height 1143
width 1040
length 2080
The amount of one-time download of fuel dm3 - 2470
Dimensions loading aperture, mm - 600x620
Area heating boiler - 34.7
The volume of water in the boiler, m3 - 2.25
Dimensions Connection, mm
pipe - O89 (3,5 ")
flanges - O185
chimney - O400
Dimensions, mm
height 2850
width 1560
length 3030
Weight - 4700
Advantages over analogues:
High efficiency is achieved by:
1. Due to the optimally laid out the pictures fireclay bricks.
2. The combustion zone inflating garjachego primary and secondary air.
3. Automatically maintaining the established regime.
4. Using baffles for effective heat dissipation.
Convenient maintenance:
1. Three-dimensional door service and furnaces.
2. The left and right door versions.
3. Convenient and reliable service tools.
Optimal design:
1. A uniform cooling of the walls of the circulating water flow protects the heat exchanger from scale and increases the service life of the boiler.
2. The use of modern technology and high-quality hardware products.
3. Boilers painted mechanically resistant powder paint.
4. The boilers are tested, which is confirmed by certificates of conformity.
Ecology:
1. Indicators in line with European standards.
The development stage readiness:
Introduced in production
Description of the development:
() Mechanical furnace boiler designed to burn sawdust, wood chips, shredded wood. Automated fuel supply system of hydraulic station, hydraulic control mechanisms move fuel storage conveyor, lift conveyor, intermediate fuel container with pump and mechanical drive in the boiler furnace. Fuel moving mechanism is mounted in the storage room. His goal - to constantly replenish the storage conveyor. With the warehouse and lifting belts, fuel is supplied from the warehouse to the intermediate fuel tank. Intermediate fuel container (tank) with dispenser, stirring screw and a mechanical drive in the boiler furnace ensure an even flow of fuel according to the pre-programmed into the control system of the boiler zinc.
Certif
2
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|