WATER FAN HEATER BLOWAIR S1 (17 KW)
Purpose of the development:
Blowair S1 is for heating the air with a water coolant and a uniform distribution of the heated air by the fan and guiding blinds. In this heating power depends on the coolant temperature and the set room temperature.
Recommended application field:
Water Heater Series Blowair S1 is used for heating of small industrial, commercial and warehouse space, as well as a service station and garage facilities at private homes. Blowair heater with a fan with low power consumption.
Technical characteristic:
Power rating - 17.0 (kW)
The maximum flow temperature - 110.0 (deg.)
Working pressure - 1.6 (MPa)
The test pressure - 1.6 (MPa)
Efficiency - 100.0 (%)
Installation method - Wall
The material of the heat exchanger - Copper-aluminum
Number of heat exchanger - 1 (pcs.)
Convection Type - Forced (fan)
Connection method - Side
Weight - 15.0 (kg)
Warranty period - 24 (months)
Overall and mounting dimensions
Width - 452.0 (mm)
Height - 494.0 (mm)
Length - 305.0 (mm)
Connect coolant - 3/4 "
Additional characteristics
Power control - Stepped
Electrical parameters
Mains voltage - 220V ~ 240V
Rate - 50.0 (Hz)
Power consumption - 80.0 (W)
Advantages over analogues:
- a wide range;
- modern design;
- ease of Management;
- low power consumption.
The development stage readiness:
Introduced in production
Description of the development:
() Maximum air flow - 1743 cubic meters. m / hour
Power range kW heating -7-17
The increase in air temperature - 26.7 ° C
The maximum coolant temperature - 110 ° C
Maximum operating pressure - 1.6 MPa
Maximum range of warm air - 12 m
The volume of water in the heater 0.5 liters
Thread couplers - G 3/4
Weight with water, 15.5 kg
Supply- voltage 230 V
Engine power, kW 0.08
Protection class IP 54 engine-
corresponds technical description
Guarantees stable results getting
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|