Purpose of the development: Moisture Meter PM-600 (moisture meter) is designed to determine the moisture content of grain and nature.

Recommended application field: In the agricultural enterprises.

Technical characteristic: The method of measurement - dielcometric Material - agricultural products (bulk) Range,% - 1 -40, depending on the material to be measured Deviation,% - 0.2-0.5 up to 20% humidity Convergence measurements,% - 0.05 - 0.20 weight measurement range, g - 20-180 (on the built-in scale) The volume of material to be measured, Jr. - 240 Display - LCD up to three digits Power supply, V - batteries 4x1,5 Dimensions in mm - 185x130x210 Weight, kg - 1.5

Advantages over analogues: - definition of full-scale weight; - large volume of sample - 240 ml; - determination of moisture content in the 99 cultures; - automatic correction of the temperature; - automatic correction mass of grain; - humidity measuring range 1-40% (depending on culture); - the possibility of bias calibration from -5.9 to + 5.9%; - the ability to connect the printer; - indication of battery discharge, auto power off.

The development stage readiness: Introduced in production

Description of the development:
()
Completeness of moisture: 1. Hopper. 2. Cup for the selection of the grain sample. 3. Brush. 4. Instruction Manual. Functions: - the device memory can store up to 99 calibrations crops; - averaging of measurement results; - definition of nature in g / l; - the introduction of automatic corrections with respect to temperature; - the possibility of bias calibration from -5.9 to + 5.9%; - the ability to connect the printer to print the received measurement readings; - low battery indication auto power off.

Certif 1

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua