Technical characteristic: Thanks to the lessons learned in building's inventory of welding equipment, CBCS "tribotechnology" were made a number of prototypes of the welder's inventory with the following characteristics: power supply - single phase; supply voltage range - 150-250 V; output current - constant pulse component; current adjustment range - 0-200 A; open circuit voltage - 48 V; Power consumption - 4.5 kW; 90% efficiency; uptime (PT) with a maximum current - 100%; Diameter of electrodes used -1,6- 4mm. Type of output characteristics - or falling steeply sloping, overall dimensions: height - 230 mm, width - 150 mm, length - 330 mm, weight - 7.5 kg. Using our proposed regulatory system will enhance the efficiency of up to 91-93%, reduce the size and weight of 1.8-2 times, which makes the device more competitive.

Advantages over analogues: Inventor advantages compared with traditional welding transformers and rectifiers are as follows: - Reduction enerogozatrat (estimated foreign experts, up to 50%); - Low weight and dimensions (5-8 times lighter than traditional power sources); - Consistent quality brewed seam. And this quality is achieved even a welder is not highly qualified; - Mobility and ability to perform welding work in confined spaces; -'s Inventory units recouped within a year;

The development stage readiness: tested in laboratory condition

Description of the development:
()
During operation of prototypes in the field of housing and construction showed the return of such devices, but by saving electricity consumption is less than a year, which makes it possible to carry this development to a class of new and highly effective. In addition, operation of devices showed that when welding is provided by: - Uniform spreading of molten metal in the weld seam, the seam seal, removing it welding voltage to provide high-quality weld; - The possibility of weld metal with a thickness of 0.5 mm and above ordinary standard electrodes with covered; - The possibility of welding parts with ferrous metals, cast iron, stainless steel and aluminum with special electrodes, which are commercially available; - The absence of spattering during the welding process, which greatly improves fire safety and reduces the risk of injury from ozhёgov. Thus, the use of technology's inventory in metal welding processes positively reflected on the quality of work and economic performance to ensure these works. Design inventirovaniya allowed to include in its composition of intellectual control obolonku (IUO), which extends the functionality of operating the machine. As a consequence -essential improved technical characteristics, such as PV, efficiency, as well as the following new additional service functions: The interactive nature of the process of finding the optimum welding conditions: IUO supports the optimal output of the inverter and simultaneously calculates performance measures. Welder performs IUO recommendations and, if necessary, in the dialog input mode using the alphanumeric keypad, the necessary additional information. For example, for steels. sheet thickness, etc. Significant energy savings can achieve optimum welding conditions.

Possibility of transfer abroad:
Licence's sale

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua