PRODUCTIVITY CONTROLLER AK-PC 551
Purpose of the development:
The controller is used for controlling the compressor and condenser cooling in refrigeration systems.
Recommended application field:
Refrigeration plants large and small sizes.
Technical characteristic:
Supply voltage:
24 V AC. DC +/- 15% 50/60 Hz, 17VA
24 VDC. current (20-60 C), 17VA
230 Vac. AC (85-265 V), 50/60 Hz, 20 VA
8 analog inputs:
Pressure measurement:
Pressure transmitter with voltage output relationship model AKS 32R
Pressure transmitter 1-5, Model AKS 32
Pressure transmitter 0-20 (4-20) mA, Model AKS 33
Temperature measurement:
Pt 1000 ohm / 0 ° C
NTC - 86K type Digital Scroll / Stream compressors
8 digital inputs:
The signal from the floating contacts to perform, for example, the following functions:
Start / stop control
Monitoring circuit protection
Warning general-purpose signal
Relay output for controlling the cooling capacity:
4 things. SPDT (8 A)
AC-1: 6 A (resistive load)
AC-15 4 A (inductive load)
2 pcs. SPST (16 aa)
AC-1: 10 A (resistive load)
AC-15 3.5 (inductive load)
2 pcs. solid-state relays for PWM Scroll - unloading:
Imax. A = 0.5
Imin. = 50 mA
Leakage <1.5 mA
2 Output voltage:
0-10 VDC. Current Ri = 1 k
It requires a separate 24 V power supply
Output for the display:
For type MMIGRS2
Data transfer:
Modbus for AK-SM 850
Environmental conditions:
-20 - 60 ° C during operation
-40 - 70 ° C during transport
Relative humidity 20 - 80%, non-condensing
The absence of shock and vibration
Degree of protection:
IP 20
Weight:
0.2 kg
Installation:
DIN-rail mounting
Terminals:
For stranded wires with max. 2.5 mm2
Certification:
Implementation of EU Directives requirements for low voltage equipment and electromagnetic compatibility for the purpose of labeling the CE mark
Tests for compliance with the requirements of the directive for low voltage equipment in accordance with EN 60730-1 and EN 60730-2-9
Tests for compliance with the requirements of the directive for electromagnetic compatibility in accordance with EN61000-6-2 and 3
Advantages over analogues:
Energy savings due to:
- optimization of the suction pressure;
- shift of the setpoint during the night;
- floating condensing pressure;
- load restriction.
The development stage readiness:
Introduced in production
Description of the development:
() The controller is provided via the Modbus network data transfer, and it can be connected to the system device type AK-SC 355, AK-SM 800. It can be used incrementally (step) fan control relay with the controller or control their speed using the analog output controller. For the speed control can be used frequency drive VLT types or fazorezka. When working at night the fan noise can be reduced. For this purpose, limited productivity capacitor by a predetermined amount.
Certif
1
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|