Purpose of the development: Cantilever machine Astrum Stinger 1530H is designed for use in small industrial enterprises with small batch and unit production for cutting parts of various configurations with high accuracy and good quality of the cut.

Recommended application field: Steelmakers of small production volumes.

Technical characteristic: Height control Plasma THC Working area 1500x3000mm Engine type stepper motors, single-sided The number of holders of the guides 4 pcs Incoming power \ AC power 220 V / 1,5 kW Cutting gas cutting mode or plazmova cutting torch when replacing the gas in the plasma torch Type gearing rake gear Travel speed 0-3000 mm / min. Height of lifting the cutter 90 mm Positioning accuracy of 0.2 mm Thickness range gas Punching: 5-50mm cutting edge with 5-70mm Thickness range plasma plasma source according to the characteristics of Pressure Propane gas, max. 0.1 MPa The oxygen pressure Max. 0.7 MPa

Advantages over analogues: 1. Specially designed guides can achieve: low noise, the ability to operate with a high intensity of load, speed and precision movement. 2. Cut the material: low carbon steel, stainless steel, nonferrous materials and alloys. 3. CNC Russified. 4. Automatic storage and preservation cutting program when power is off. 5. The plasma torch height control function during cutting THC (torch height control): Automatic lifting the torch implemented THC, when you change the height of the sheet, the plasma torch can protect from damage and extend the life of consumable items (nozzle / protective cap / electrode). 6. Function status display. 7. Compatible with plasma sources from different vendors.

The development stage readiness: Introduced in production

Description of the development:
()
It features high portability and ease of use. Allows automated gas or plasma cutting in the shop and in the field. Ideal substitute for manual cutting on small productions. The machine consists of a frame with a longitudinal rail and one rack, which moves the carriage installed on it a transverse beam and block numerical control (BNC). Preparation of control programs carried out by a Russified computer-aided design (CAD) FastCAM, included in the package. Processes format drawings AutoCad, data transmission in the car is carried out with the help of flash cards via the USB-connector.

Certif 1

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua