Purpose of the development: The machine is designed for AC welding with a constant force of compression components of low-carbon, low-alloy and stainless steel, titanium and aluminum alloys, brass, as well as cross-shaped joints rebars class BI, AІ, AІІ, A1ІL.

Recommended application field: The machine is designed for AC welding with a constant force of compression components of low-carbon, low-alloy and stainless steel, titanium and aluminum alloys, brass, as well as cross-shaped joints rebars class BI, AI, AII, A1IL.

Technical characteristic: - Power supply AC - 380; - Rated power at 50% duty cycle - 75 kVA; - Maximum secondary current - 19kA; - Maximum clamping force of at least 650 MPa; - Nominal flight electrodes 500 mm; - The nominal solution - 240 mm; - The range of thickness to be welded, mm: low-carbon steel 0.5 + 0.5 5.0 + 5.0; Stainless steel and titanium alloys from 0.5 + 0.5 to 1.5 + 1.5; alyumineevyh alloys 0.5 + 05 to 0.6 ± 0.6; reinforcement from 4.0 + 4.0 to 16.0 + 16.0; - Welding performance at a maximum thickness of low-carbon steel welds of at least 200 / min. Unlike analogue to create a machine equipped with a pneumatic control. The technical level, technological capabilities and cost indicators to create a machine surpasses analogue PL80 firm "Dalex" (Germany). The prototype, carried out acceptance tests. Established manufacturing facilities in the issuance program of not less than 100 vehicles per year. In the production of welding machines are not used processes that violate the environment.

The development stage readiness: Tested experimental exploitation order

Possibility of transfer abroad:
Licence's sale

Photo

Country Belarus

For additional information turn to:
E-mail: gal@uintei.kiev.ua