SET OF EQUIPMENT FOR WASTEWATER TREATMENT OF GALVANIC PRODUCTION
Purpose of the development:
The system is designed for wastewater treatment lines electroplating - Zn, Cu, Ni, Cr, Al, etc. anodizing combined method that combines chemical treatment and sewage advanced treatment in an ion exchange unit..
Recommended application field:
Galvanic сleaning.
Technical characteristic:
Productivity of the complex:
- when processing alkaline waste acid - from 2 to 6 m3 / h
- the processing of chromium waste - from 0.5 to 2 m3 / hr
The area occupied by the complex - 25 - 50 m2.
Advantages over analogues:
The complex wastewater electroplating has several advantages: a simple flow diagram of the operation of equipment, ease of automation of its work, the reduction of the production areas for placement of sewage treatment plants, the possibility of wastewater treatment without dilution, reduced salinity and reducing sludge volume produced in the purification process.
The development stage readiness:
Introduced in production
Description of the development:
() Wastewater treatment is carried out to the level of maximum permissible concentrations of heavy metals and their compounds in the wastewater.
The complex is designed to work with one or several galvanic lines and includes the following equipment:
- capacity-collections of acid-base and chromium-containing effluent;
- capacity-collections concentrated solutions;
- reactors, chemical treatment of the water;
- the preparation units and dosing of reagents;
- capacity-sedimentation separation sludge;
- filter press sludge dewatering;
- ion-exchange plant post-treatment water;
- complex management system;
- the system returning the effluent to be reused for washing operations.
corresponds technical description
Guarantees stable results getting
Possibility of transfer abroad:
Licence's sale
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|