|
RADAR ABSORBING, ACOUSTIC- AND THERMAL INSULATION MATERIALS PMT AND P-HT SERIES
Purpose of the development:
Designed to protect facilities and staff from exposure to electromagnetic radiation of the microwave to heat and sound insulation of buildings and equipment.
Recommended application field:
They can be used in the construction of environmentally friendly office space and housing.
Technical characteristic:
For P-MT:
- the surface density, g / cm -3 degree: 960;
- thickness: 12;
- tensile strength with the size of 50x100 mm strips, kHz: 294;
- normalized humidity,%: 12;
- thermal conductivity, W / (m * K): 0.047;
- sound absorption coefficient at a frequency of 4000 Hz,%: 50;
- absorption coefficient of microwave radiation, dB to 25.
For P-NT-01:
- the surface density, g / cm -3 degree: 250;
- thickness: 4.5;
- tensile strength with the size of 50x100 mm strips, kHz: 78;
- normalized humidity,%: 3;
- thermal conductivity, W / (m * K): 0.045;
- sound absorption coefficient at a frequency of 4000 Hz,%: 50;
- absorption coefficient of microwave radiation, dB to 25.
For U-02 HT:
- the surface density, g / cm -3 degree: 335;
- thickness: 5.2;
- tensile strength with the size of 50x100 mm strips, kHz: 88;
- normalized humidity,%: 3;
- thermal conductivity, W / (m * K): 0.045;
- sound absorption coefficient at a frequency of 4000 Hz,%: 52;
- absorption coefficient of microwave radiation, dB to 25.
Advantages over analogues:
Non-toxic, light, technology in use.
The development stage readiness:
Ready for application
Description of the development:
()
New construction materials are made in the form of roll-type batts felt widths of up to 1.7 m and lengths up to 30 m Operating temperature range -. From minus 50 to plus 70 ° C (up to + 100 ° C for R-HT) at a relative humidity from 0 to 98%. The development of validated, ready for demonstration - conducted field tests.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale
Combinated reduction to industrial level
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to:
E-mail: gal@uintei.kiev.ua
|