Purpose of the development: The measurements of the wavefront of the test by comparing it to the test with any non-standard front aberrations for which information is recorded in the optical memory array. Optical strain testing of spatially inhomogeneous transparent or reflective objects. Individual diagnostics of the person with specific aberrations by measuring the dynamics of phase changes in the distribution of non-standard background aberration, it is impossible to perform a sensor with a refractive optics.

Recommended application field: Medicine.

Technical characteristic: - the number of focusing elements - 32 x 32; - the size of the focusing element (mm) - 0.4 x 0.4; - the number of tricks in a single aperture - 2; - focal length (mm) - 24 and 12; - light focusing efficiency (%) - 60; - the maximum angle measured (°) - 0.85; - the presence of optical memory - there is; - compensation custom wavefront aberrations of the test - is provided; - type reference wavefront - arbitrary; - the emission wavelength (nm) - 632.8.

Advantages over analogues: - increased sensitivity and accuracy of measurement of aberrations, which is achieved by optimal selection of the maximum focal length; - advanced dynamic angular measurement range, which is achieved due to the special construction of the matrix; - previous compensation aperatsy custom holographic matrix of microlenses.

The development stage readiness: Tested experimental exploitation order

corresponds technical description
Conforms to technical characteristic

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua