Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

HIGH EFFICIENCY ADSORPTION MATERIAL FOR GAS TYPE CH4, H2


Purpose of the development: For use in vehicles, clean fuel - natural gas and hydrogen.

Recommended application field: The gas processing industry.

Technical characteristic: The amount of gas in the tank with the adsorbent at 40 atm, liters / dm3 - 160-170. The final amount of gas in the adsorbent at a pressure of 2.0 atm, liters / dm3 - ~ 4. The number of injection cycles unchanged Performance - 5000. The starting material of the adsorbent - Basalt fiber.

Advantages over analogues: The developed material is characterized by adsorption principles of adsorption on the outer surface of the adsorbent. Using a thin, mechanically strong filament basalt fiber, carbon deposited layer (soot), which is the absorption layer. Collected and compacted yarns adsorption layer serving as adsorption material.

The development stage readiness: Ready for application

Technical and economic effect: Adsorbent cost, $ / dm3 - 1.5-2.5 The cost of starting material, $ / dm3 - 1.0-2.0 The cost of the technological processes in the industrial production, $ / dm3 - 0.5-1.0

Description of the development:
()
As a result of R & D has developed a technology of manufacturing high-performance adsorbents based on submicron thin basalt yarns, coated with carbon and activated plasma. This material has high adsorption properties at normal elevated pressure and has a sufficient mechanical strength and sufficient thermal stability when heated to 900 ° C. If a conventional gas cylinder at a pressure of 200 atm. (19.6 MPa) is injected in 200 liters of gas per liter of volume, using a gas cylinder with an adsorbent at a pressure of 40 atm injection. It absorbed in one liter of a volume of about 160 liters of gas at a pressure of 100 atm. - Approximately 250 liters of gas, and at standard pressure of 200 atm. One liter volume can adsorb 300? 350 liters of gas. This is 1.5? 1.75 times more than normal in cylinders without adsorbent at the same pressure (19.6 MPa).

Information about newness of the development:
there are Ukrainian patents -- 6 items

corresponds technical description
Guarantees stable results getting

Possibility of transfer abroad:
Licence's sale
Licence's sale
Technological document's sale
Combinated reduction to industrial level

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: