MICROMOTOR RM-11 * 24R
Purpose of the development:
Micromotor RM-11 * 24R is designed to create a subminiature drive sizes smaller than 10 mm.
Recommended application field:
Optics, micro and nanomanipulators, robotics, microsurgical system, integrated semiconductor technology, fiber and laser technology, etc.
Technical characteristic:
- maximum speed:> = 100 rpm;
- maximum torque:> s0 = mN * m;
- self-braking time:> 30 mN * m;
- the minimum angular spacing (resolution): <= 5 arc.sec;
- the duration of the strobe tick: 20-30 us;
- the frequency of repetition of steps (pick-up): up to 10 kHz;
- the acceleration time until the maximum speed (without load inertia): 200 us;
- a drift (at 20 ° C): not more than 1-2 arc.sec / h;
- "dead" stroke (play): less than 1-2 arc.sec;
- axial bearing capacity of the platform: up to 500 g;
- supply voltage: 12 V;
- the maximum current (at maximum speed): no more than 500 mA;
- power consumption range in accordance with the pulse mode: 0,01-5,0 W;
- size: 57 * 40 * 16 mm;
- through-hole diameter: 7 mm;
- engine weight: 50 g;
- driver Weight: 20 g.
Advantages over analogues:
Compared to conventional engines has a small size and weight, flat design, great bearing capacity, a wide range of adjustment of the speed, the possibility of the formation of ultra-small angle micromovings almost instant acceleration and deceleration, self-locking when disconnecting the excitation, the almost complete absence of drift.
The development stage readiness:
Introduced in production
Description of the development:
() The rotary part and at the same time axis are based on precision roller bearing 032 * 015 * 9, and interpretive - on the basis of a flat piezoelectric actuator quasi type. Conjugation through the load carrying flat platform mounted on a bearing, or through-hole ("hole shaft") on this platform. To connect using a series of charges DRIVER RM-LMD.
The input current is virtually independent of the load. To demonstrate the pulsed mode are supplemented can pay VELOCITY-RM.
Information about newness of the development:
there are Ukrainian patents -- 1 items there are patents of other countries -- 1 items
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|