CAPACITIVE SENSOR OF THE CORNER TURN ANGLE FOR ROAD CONTROLLERS OF THE ADJUSTABLE-CLOSING FITTINGS OF THE NPP
Purpose of the development:
For control and measuring facilities (road controllers) of regulating and stop valves of nuclear power plants.
Recommended application field:
Nuclear power.
Technical characteristic:
- resolving power, degrees. - + - 0,1;
- accuracy of transformation of the angle of rotation, deg. - + - 0.5;
- interface for data exchange - RS-485;
- exchange rate, bit / s - 19200;
- protocol of exchange - MODBUS;
- power supply, V - 5; 3.3;
- power consumption, mW:
- operating mode - 80;
- micro-consumption - 0.08.
Advantages over analogues:
- improved metrological characteristics;
- increased reliability of the controller in extreme conditions of the armature operation due to the territorial diversity of the sensor and the electronic unit;
- the possibility of upgrading the serial devices with which the operating armature is equipped by a simple mechanical replacement of the inductive sensors for capacitive ones.
The development stage readiness:
Ready for application
Description of the development:
() The use of sensors in conjunction with road controllers of the new generation can significantly increase the reliability of the regulating single-turn armature, and hence the reliability of operation of the NPP as a whole.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Combinated reduction to industrial level
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|