Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

ELECTROADIATOR HOUSEHOLD MODEL ERP


Purpose of the development: Electro-radiator EPP is designed for heating residential, administrative commercial, industrial and utility rooms and is designed for continuous operation without supervision.

Technical characteristic: - setting the power of the shadow heater from 50-100%; - setting the temperature of the coolant from 50 to 85 ° C; - setting the time and day of the week.

Advantages over analogues: Electro-radiators EPP have a number of qualities that distinguish them from other radiators: - convenient, multifunctional digital interface of the control unit; - the possibility of continuous operation of electric radiators during the entire heating season in contrast to other heating appliances; - the possibility of cascading several electric radiators in one room (master - slaves) with one temperature sensor; - there is an electronic power regulator; - safety and reliability allow the electric radiators to work for a long time without supervision; - long service life of the electric radiator - more than 20 years; - the need for capital expenditures for projects and construction of boiler houses and other heat communications is eliminated, no permits are required, special wiring is created inside the premises, since the heater is considered to be a household appliance; - ecological and fire safety of the proposed method of heating; - simplicity of construction and installation of electric radiators, during installation it allows to provide high labor productivity (a team of 2 people for 8 hours mounts up to 20 batteries on a turn-key basis); - noiseless operation of instruments; - possibility of connecting a wireless air temperature sensor; - it is possible to regulate the temperature regime in the premises by means of a local disconnection of a part of the electric heaters; - during the operation of the electric radiator, oxygen is not burnt out, air is not dried.

The development stage readiness: Introduced in production

Description of the development:
()
Electro-radiator EPP meets the requirements of GOST 14087; GOST 16617; TU-U29.7-35447631-002: 2010 and embodies the original solutions in the field of electric heating. Due to the use of multifunctional digital control of the process of thermal regulation, it belongs to a fundamentally new type of highly efficient energy saving electric heaters and is an alternative to traditional heating systems, centralized heating and autonomous heating boilers (gas, electric, electrode, etc.), is the lowest minimum capital cost convection heating system of all known . Structurally, the ERP electro-radiator consists of a heat exchanger with a special non-freezing (-10 ° C), environmentally safe liquid and is a set of radiator bimetallic sections made of aluminum and steel (the number of sections of the heat exchanger is determined by the customer), a heater heater, a digital multifunction control and protection unit , Located on the front panel, which also issued control and display, connected to a wire (5m) remote temperature sensor Air urs in the room. The digital control unit (thermostat) with a liquid crystal display is installed in the EPP electro-radiator with the possibility to program the operation mode for four units according to the time and temperature of the indoor air. Operating modes: weekly mode (Mon-Fri + Sat-Sun); Day mode (24 hours) and standby function (from +5 to +25 ° C).

corresponds technical description
Guarantees stable results getting

Possibility of transfer abroad:
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: