Purpose of the development: The microprocessor time relay is designed to enable / disable the load at user-specified intervals.

Recommended application field: In different industries, where it is necessary to control the load with an independent time delay.

Technical characteristic: Rated supply voltage, V - 230/240. Frequency of the supply network, Hz - 45-62. Voltage at which the working capacity is maintained, V - 160-280. Permissible harmonic composition (nonsinusoidal) of the supply voltage EN - 50160: 2014 (EN 50160: 2010, IDT). Readiness time when supply voltage is supplied, s - no more than 0.4. Counting error,% - no more than 0.5. The time control range - from 0.1 s to 10 days. Adjusting the time delay - buttons on the front panel. The digital indication of the remaining time. Purpose of the product - control and distribution equipment. Nominal operating mode - continuous. Number and type of contacts (switching) - 2. Climatic modification - UHL 3.1. Degree of protection of the case - IP40. Degree of protection of the terminal board - IP20. Switching capacity of output contacts at cos = 1: - under load - 6 A, time, not less than - 100 000; - under load 1 A, once, not less than - 1 million. Consumed power (under load), W - no more than 0.5. Permissible degree of pollution - II. Overvoltage category - II. Protection class against electric shock - II. Rated insulation voltage, V - 450. Rated impulse withstand voltage, kV - 2,5. Wire cross section for connection to terminals, mm - 0.5 - 2. Tightening torque of the terminal screws, N * m - 0,4. Weight, kg - no more than 0.150. Overall dimensions, HxBxL, mm - 90x18x65. Installation (installation) of the product - standard DIN-rail 35 mm.

Advantages over analogues: Изделие сохраняет свою работоспособность при любом положении в пространстве. Материал корпуса - самозатухающий пластик. Число алгоритмов работы - 17.

The development stage readiness: Introduced in production

Description of the development:
()
The relay provides a certain sequence of operation of the load according to the user-defined mode. The REV-114 provides seventeen algorithms for work: - delay on inclusion; - time delay when power is applied; - periodic with a delay when switched on; - periodic with time delay at start-up; - pulse generator; - delay on inclusion with external start; - delay on disconnection with external triggering; - pulse I with external start; - pulse II with external triggering; - on-off delay with external triggering; - step of the load relay (for each closing of the control contact); - periodic with external triggering and delay on inclusion; - periodic with external triggering and time delay at power-on; - pulse generator with external triggering; - start-stop; - always on; - always disabled.

corresponds technical description
Guarantees stable results getting

Possibility of transfer abroad:
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua