Purpose of the development: RLC meter PNT 1100 is designed to automatically determine the parameters of the impedance (capacitance C, inductance L, resistance R, mutual inductance M, loss tangent and tangent tgb phase shift tgf (quality factor Qc and Ql)) for any of dvuhelementarnyh equivalent circuits, as well as the percentage deviation from the presentation of the results of measurements in digital form. The device is designed to replace the outdated automatic bridge P 5083, but provides significantly higher performance and functionality.

Recommended application field: MHC RLC meter 1100 may be used to perform metrology operations, under the control of electrical and electronic products, research, non-electrical quantities measurements using transducers of any type.

Technical characteristic: Basic specifications: - Working frequency: DC, AC of 0.1 to 1 MHz; - Accuracy class (at the fundamental frequency of 1 kHz) 0.01 / 0,002; - When calibrated against an external model as 0.003 / 0.0002; - DC measurement error of less than 3x10 [-5]; - Error in measuring the DC resistance of less than 3x10 [-5]; - Range of AC voltage on-site measurements (depending on the values Measured value) In of from 0.01 to 10; - Measuring the time at a frequency of 1 kHz, s, not more than 2; - Overall dimensions 250x180x50; - Weight, kg (without battery weight) of not more than 3.5. Operating conditions: - Ambient temperature, degrees C from 5 to 35; - Humidity of the ambient air, from 20% to 95; - Mains voltage, V 220 + - 22; - Frequency, Hz 50 ± 1; - Power consumption, not more, W 10.

Description of the development:
()
The device provides automatic selection of the nature of the reactivity of the measurement object on the criterion of "prevailing parameter"; chetyrёhparnoe connection object of measurement; account of initial parameters; averaging the results of measurements; to eliminate the influence of network interference (on separate frequencies specified); measurement with adjustable voltage alternating current applied to the measurement object; two measurement modes (single - for measurement of unknown quantities; tracking - for continuous measurement of time-varying quantities); two types of start-up (automatic - adjustable in the range from 0.1 to 99 seconds cycle start, and manual).

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua