METER FOR THERMOMETRIC OF SENSOR PARAMETER PRECISION MULTI SAZ20
Purpose of the development:
SAZ20 meter is designed to measure:
- The temperature by temperature sensors (RTDs any, thermistors, 6-diode type sensors or thermocouples);
- Force, pressure, deformation, by means of small displacements shunts DC;
- Humidity, temperature, displacement using capacitive sensors with frequency output.
Recommended application field:
Scope Meter:
During verification, calibration, testing and metrological certification of measuring temperature, flow rate, etc., remote high-precision temperature measurement and (or) other parameters given above under the control of process parameters, as well as a nucleus of a complex information-measuring system . The device can be used as a complete with a personal computer type ІVM (hereinafter - PC) and offline.
Technical characteristic:
Basic specifications:
- The measurement range of the resistance in ohms of 5x10 [-6] to 1x10 [11];
- The measurement range of the coefficient of transmission, from Ohm 1x10 [-8] to 1.0;
- The measurement range of voltage, V from 5x10 [-9] 2.5;
- The relative error in measuring the resistance of 5x10 [-6] to 5x10 [-5];
- The relative error of measurement of the transmission of not more than 2x10 [-5];
- Relative measurement error voltage not exceeding 2x10 [-5];
- Absolute sensitivity to resistance, Ohm worse 1x10 [-6];
- The absolute sensitivity of the voltage nV better than 5;
- Temperature measurement error, m grad.K not more than 0.5;
- Sensitivity to temperature, m grad.K not worse than 0.1;
- Power sensor, from 0.6 mW to 10;
- The power consumed by the system from the network, no more than 2 VA;
- Weight, kg, not more than 0.5;
- Dimensions, mm 80x180x60;
Description of the development:
() In standalone mode, the instrument can measure in two channels with arbitrary selection of the sensor type for each of the channels, for example, two identical (or different), a temperature sensor or a temperature sensor and a force sensor. In PC mode, the unit provides measurement parameters sensor resistance or voltage or load cells for eight or sixteen channel areas with two eight-channel switches. Type of sensor connected to danomu channel arbitrary. Depending on the application, the device can be equipped with various modifications switch.
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|