ELECTRIC HEATERS OF ELECTROTRANSPORT ROLLING STOCK
Advantages over analogues:
Benefits:
- Thermal insulation resistance of a planar element is 25% less than the thermal resistance of the round;
- To maintain the desired temperature of the surface of PEN consumes energy for its own needs 2.5 times less than the heater;
- Pan high uniformity in surface temperature and large heat exchange surface area;
- PEN-super different from the standard presence of ceramic gradient layer and increased the ability of radiating;
- Application PENov into the heating eliminates heat loss and reduces noise turbulence heater;
- When replacing the heaters on PENy overall reduction in energy consumption at the same thermal effect in 1,6-2,7 times.
Description of the development:
() Heated car.
PENy heater in the open type:
6 used PENov 30 mm wide and 120 watts, consistently included in the network of 750 V. The surface temperature of the pan - 270 degrees C. Dimensions of the heater - 170x200x500 mm. Power consumption - 720 watts., Thermal efficiency - 420 watts.
PENy heater in a closed type with increased radiant component teplotoka:
6 used PENov width of 30 mm and a capacity of 110 watts, consistently included in the network of 750 V. The surface temperature of the heater - 100 degrees C. Dimensions of the heater - 170x200x500 mm. Power consumption - 660 watts, the thermal efficiency - 525 watts.
Heated driver's cab.
heater:
PENy used with a flat surface heat output of 7.2 kW and 750 included in network B. The flow of air - 200 kg / hr. The surface temperature of the pan - 250 degrees C. Power consumption - 7.2 W, thermal efficiency - 5.7 kW.
Benefits:
there is no noise in the cabin, the cabin warms up quickly, PENy withstand a double over-voltage.
Possibility of transfer abroad:
Licence's sale
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|