Purpose of the development: Designed to protect all ferrous metals.

Advantages over analogues: Benefits: - Ease of application. Zinga is applied to conventional spray, brush or roller, dipping or spray cans. Coating Zinga advisable to apply a thickness of 40 to 120 microns (one two three layer 40-60 microns). Consumption for coating dry film thickness of about 40 microns 0.25 kg / m. Dilution Zinga (maximum 10%) is only a special solvent Zingasolv. Zinga requires thorough kneading before application and periodic agitation during application. Application is possible under normal conditions in a wide range of temperatures and even in a humid environment, as all ferrous metals, or previously galvanized surface in any way. Zinga coating can be applied to damp and even slightly rusty surface; - Ease of surface preparation. Zinga is applied to the cleaned surface with a roughness of 15 microns. Is optimal sandblasting the surface. Treatment can be done manually peeling tool using stripping circles, metal brushes, sandpaper. Degreasing solvent produced Zingasolv. Zinga coating elastic and compressible. When zinganizatsii no restrictions on the size of tsinkuemyh designs, and there is no deformation of the product; - Maintainability or re-galvanizing. Due to the unique property of Zinga again "liquefy" the old and new layers of Zinga smeshivayutsya into a single layer, restoring a single zinc coating; - Welding zingovannyh designs possible without violating the strength properties of the weld. After stripping the welded sections, a simple application of Zinga produces a uniform zinc coating; - Zinga coating is non-toxic due to the fact that it is non-toxic and non-toxic zinc-aided neutral resins. These above features zingazatsii and determine the application of high technology. Thus, responding to the latest requirements of the protection of metal, Zinga has advantages. Same ratio quality / price allows to evaluate the cost-coverage Zinga, as most justifies the means.

The development stage readiness: Introduced in production

Description of the development:
()
Coating Zinga - an extremely efficient thin-film zinc protection of all ferrous metals from corrosion. Zinga combines the advantages of two well-known ways to protect iron from rust: hot-dip galvanizing and coatings, but has a number of drawbacks. As a dual system, Zinga provides active (cathodic) and passive (barrier / Film) protection against rust, which is an original technology of galvanizing, patented under the name Zinganisation (zinganizatsiya). Zinga - an industrial product quality, which is a single component liquid composition (fully ready for use), consisting of zinc purity avtomizirovannogo 99,995% (ISO 752), binders and volatile substances (unsaturated hydrocarbons). In the dry coating layer Zinga contains 96% zinc (ISO 354-1976). Zinganizatsiya (Zinganisation) is the only one of its kind technology galvanizing Zinga by applying to the prepared surface of ferrous metals. Zinga is comparable to hot-dip galvanized for corrosion protection efficiency, though so easy to apply the paint. The service life of the coating is 25 - 30 years, depending on the operating conditions and the thickness of the zinc layer. Coating on top of Zinga. Most paint adhere to the Zinga coating without additional surface preparation, allowing Zinga as the first layer in multilayer special anti-corrosion systems (chemical, oil and gas, hydro, energy facilities, special purpose, for rail, water and road transport). Especially effective is the combination of Zinga with polyurethane, epoxy paints and aktilovymi. The total lifetime of such complex systems of anticorrosion vozrastaetv 2 -2.5 times.

Information about newness of the development:
there are patents of other countries -- 1 items

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua