TECHNOLOGICAL LINE FOR PROCESSING OF FLEXIBLE TIRES AND RUBBER WASTE
Purpose of the development:
For processing worn tires (including cord), as well as rubber waste into fine disulcanised rubber powder and crumb with a large specific surface. Depending on the required performance, the line is completed with a different number of modules of the same type.
Recommended application field:
Enterprises for the production of rubber products, as well as organizations for the processing of solid industrial and household waste.
Advantages over analogues:
The resulting powder is 15-20 times cheaper than raw rubber. It can replace 20% of it for the production of tires and rubber products or 80% for the manufacture of consumer goods (soles, mats, etc.) and non-responsible products (substrates for rails, coatings for railway crossings, livestock farms, etc.).
The development stage readiness:
Tested experimental exploitation order
Description of the development:
() In the line, effective grinding is carried out on a dispersant-extruder on the basis of the elastic-deformation method at moderate temperatures, followed by separation of metallic or textile cord elements from the resulting powder. The dispersion of the obtained powder is 0.1-1.0 mm.
Information about newness of the development:
there are Ukrainian patents -- 7 items
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Combinated reduction to industrial level Creation of joint enterprise Joint production, sale, exploitation
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|