Purpose of the development: Is designed to measure the volume of oil in the pipeline costs for telemetry oil pipelines.

Recommended application field: Scope flow meter: - Drinking water and technical; - Contaminated water; - Petroleum, chemical, food, etc. liquid foods; liquids with high viscosity.

Technical characteristic: Technical characteristics: Accounting volume made considering the flow direction. Flowmeter provides archiving and viewing the results of daily records for the last two months and monthly records for the last two years. The results in the flow meter accounting protected and stored in non-volatile memory. Flow meter is connected to external devices via the serial interface RS232C. Flow meter provided for the connection to a modem that provides remote access to the results of the accounting and the formation of the control signals. Provided an opportunity to display the measurement results using the cost-frequency pulse TTL signal with "momentum factor" 700-800 pulses / s. Power is supplied from the flow meter (220V + 10-15% at 50 ± 1 Hz) or 12 V DC. Through the block iskrozashchity made the connection to the electronic unit: - Power supply; - To external devices via the serial interface; - To external devices for transmitting the pulse signal frequency. The power consumption of the flow meter does not exceed 2 watts. Open-circuit voltage and short circuit current intrinsically safe communities do not exceed - respectively 15 and 400 mA. Valid values are reactive link parameters shall not exceed: electric capacitance of 0.1 uF, the inductance of 0.1 mH. Current consumption of the electronic unit through the following power does not exceed 100 mA. The unit consists of intrinsic safety barriers iskrozashchity-BUS 2-15 and BUS-2-15P. An integral part of the flow meter Dimensions, Weight mm and not more than kg, more electronic block 290x220x105 0.5 electro acoustic transducer 110x45x45 0.3

Description of the development:
()
Flow meter is designed to measure the volume of use of oil in the pipeline at the remote areas of the pipeline to monitor the possible outflow of oil on the linear sections of the pipeline. Flow meter is implemented in the performance with cut-converters for mounting on a dedicated section of the pipeline and takes into account the change in the velocity profile in the context of the pipeline in case of change of the flow rate of oil. During the application on the device allows pipelines operational records of oil on the linear sections of the pipeline, which until now had not been implemented. Flowmeter is marked Ex 1EhіbііVTZH meets the requirements of GOST 22782.5, GOST 22782.0 and it can be installed in explosive areas and external systems. Special conditions of application flow meters (X sign on the label approvals) indicate that the connection of the electronic unit to the power supply and external peripherals through barriers iskrozashchity BІZ 2-15 TU-In-23189879.011-99. By flow meter can be connected to a general-purpose serial products, which meet the requirements of 4.6.24 Buyeo ESU and devices that have a certificate of explosion protection and regulatory approvals in Ukraine. The results of measurements and the information that is entered, issued in collecting and recording over the momentum and exit codes. The volume of liquid that has passed through the flow meter during the work flow meter and the total operating time, fixed in energozavisimoy memory and stored in a case of connecting the power for 8 years. Flow meter can be used both independently and in multi-channel systems of gathering information. Flow meter is programmed device and can provide different functions (as agreed with the customer) - remembering the cost per hour and / or per day. Upon request, give information on the system / device of gathering, in the agreed format; ensuring operation mode of the dispenser, pump control, valves, measurement of reverse flow, etc. Flow meter can be used to control processes in the metallurgical, chemical and other industries; in water supply and drainage; during the determination of the cost of water, acids, alkalis, oil, refined products and other liquids. Climatic execution flow meter: - Operating temperature range -30 ... 85 °. C; - Up to 98% humidity. Constructive execution according to GOST 14254- ІR56. Flow meter is designed for clock operation and requires a minimum of maintenance.

Possibility of transfer abroad:
Licence's sale

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua