Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

ULTRASONIC FLOWMETERS FOR LIQUIDS WITH OVERHEAD CONVERTER


Purpose of the development: Designed to measure the cost of bulk liquids.

Recommended application field: Scope flow meter: - Drinking water and technical; - Contaminated water; - Petroleum, chemical, food, etc. liquid foods; liquids with high viscosity.

Technical characteristic: Technical characteristics: - The inner diameter of the pipe, mm - 250; 325; 400; 500; 700; 1000; 1200; - The wall thickness of piping mm - 9.5 to 17; - The flow rate in Pipelines from m / s - 0.25 and 9; - The temperature of the oil in the pipeline from, hail. C - 0 to 300. Accounting volume made considering the flow direction. Flowmeter provides archiving and viewing the results of daily records for the last two months and monthly records for the last two years. Results Accounting flow meter is protected and stored in nonvolatile memory. Provided an opportunity to display the measurement results using the cost-frequency pulse TTL signal "impulsfaktorom" 700-800 pulses / s during calibration of the flow meter. - Power flow meter is provided by 24V DC via the spark protection. - Power consumption flow meter is less than 2.4 watts. - Open-circuit voltage and short circuit current intrinsically safe communities do not exceed respectively 24 and 200 mA. - Valid values are reactive link parameters shall not exceed: electric capacitance of 0.1 uF, the inductance of 0.1 mH. Climatic execution flow meter: - Operating temperature range of - 35 ... 85 degrees C; - Up to 98% humidity. Constructive execution according to GOST 14254 - ІR56. Flow meter is designed for clock operation and requires a minimum of maintenance. An integral part of Dimensions, Weight flowmeter mm, not more kg, more electronic block 165x160x105 0.5 converter elektroakustichny 60x30x80 0.2

Description of the development:
()
Ultrasonic flowmeter for liquids with patch transducers are designed to measure the volumetric fluid costs and control of technological processes in the metallurgical, chemical, etc. industries; in water supply and drainage; during the determination of the cost of water, acids, alkalis, oil, refined products and other liquids. Flow meter is implemented in the performance with patch transducers to be mounted on a dedicated section of the pipeline. During the application on the device allows pipelines operational records of oil on the linear sections of the pipeline, which until now had not been implemented. Flow meter is marking Ex 1EhіbІІVTZH meets the requirements of GOST 22782.5, GOST 22782.0, and it can be installed in explosive areas. Flowmeter has a user-friendly, has a small size and power consumption is fed DC 24V via the IS barrier BIZ-1-24. The volume of liquid that has passed through the flow meter during the work flow meter and the total operating time, fixed in energonezavisimoy memory and stored in case of disunion power for 8 years.

Possibility of transfer abroad:
Licence's sale

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: