Purpose of the development: Getting fuel by okuskovyvaniya waste coal and peat without additional binders.

Recommended application field: Fuel has a wide range of use: boiler urban and regional values for combustion in a domestic environment, heating moving trains, etc.

The development stage readiness: tested in laboratory condition

Description of the development:
()
The basis of the technology (contains "know-how") is adgeziyno-chemical processes that occur in the viscoplastic systems formed by fine particles of fossil coal, which themselves cause astringency. Agglomeration fuel possesses a high thermal power, and physico-mechanical properties, in particular adequate mechanical strength, water resistance and heat resistance. Formation during combustion of these fuels has good permeability, which provides a full measure of combustion at a relatively high ash content. Technology okuskovyvaniya not energy intensive. Per ton of finished product is spent up to 35 kW / hour based on drying. Cost of processing 35-40 UAH / t The finished product has the form of cylindrical rods of diameter 30 mm and length of 50 - 200 mm. Pieces even in the raw state, have sufficient strength and do not stick to one another. Drying is carried out by mechanical ventilation for 1 hour, or in conditions of natural ventilation for 2-3 days. The finished fuel, even with the use of coal slurries visokozolnyh has teploobrazovatelnuyu capacity not less than 3500 kcal / kg, okuskovyvanii low ash coal can reach 4500 kcal / kg and the anthracite slurries and poshiba - 6000 kcal / kg. Level of specific energy: thermal power consumed by installation, 100-120 kW.

Possibility of transfer abroad:
Licence's sale
Technological document's sale

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua