Purpose of the development: To promptly determine the type of cast iron (ductile or gray) directly into castings.

Recommended application field: Indicators can be used in conditions of cast-iron foundry at 100% strength or the sample directly under the control of the foundry, company-consumers of ductile iron for the input control. To promptly determine the type of cast iron (ductile or gray) directly into castings. Used in the control of ductile iron castings.

Technical characteristic: Specifications: - Measurement time - from 2 to 20 casts / min; - Weight indicator with battery and sensors, no more - 2 kg; - The distance between the measured surface - from 12 to 250 mm; - Autonomous power supply - 12 V; - Uptime, no less - 10:00.; - Display - LCD display.

Advantages over analogues: Results of the survey indicator not depend on the shape of the casting. Preparing the casting to the control requires only blast descaling . Castings can be inspected and, after applying the primer even if it has not yet dried . This unit refers to the indicators so the period of its operation is not necessary in the annual metrological verification. Verifying indicator is using a sample supplied indicator. When working with the indicator does not require special knowledge and highly qualified personnel . The indicator is supplied and operated in a protective case . To hand the person conducting the examination of castings were free , the indicator is provided with special straps to wear.

The development stage readiness: Introduced in production

Description of the development:
()
The principle of operation of the indicator is based on comparing the results of the survey indicator casting the actual size of the casting, measured with a caliper . For the survey indicator simply click on the " Control" and attach sensors to display opposite surfaces of the casting. The distance between the surfaces must be in the range of from 12 to 250 mm. Subsequent measurements do not require pressing . The mode of operation with a constant basis . In this case, the results of the measurements are displayed with two LEDs : red or green .

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Belarus

For additional information turn to:
E-mail: gal@uintei.kiev.ua