Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

ANALOG-TO-DIGITAL OSCILLOSCOPE C1-157/3


Purpose of the development: Designed for the study of periodic electrical signals by visual observation and measurement of their amplitude and time parameters

Recommended application field: Measurement of electrical signals in the laboratory and workshop environments. Radio industry.

Technical characteristic: o working part of the screen - 80x100 mm; o bandwidth tract vertical deflection ( GUT) - 120 MHz; o the number of channels - 2 pcs. ; o bias ratio range of from 0.005 to 5 V / div ; o limit basic error - ± 3% ; o ratio range from 2x10- sweep 9 to 0.5 s / div ; o basic error limit of ± 4 and ± 5% ; o there is a component tester ; o bandwidth TVO in digital mode at least 10 MHz; o range of deflection factors in a digital mode from 0.005 to 5 V / div ; o ratio range scanning in digital mode from 5x10- 8 to 20 s / div ; o Basic error limit voltage measurement between cursors - ± 3% ; o limit the basic error of measurement of time intervals between cursors - ± 2,5%; o sampling frequency - 50 MHz; o Vertical Resolution - 8 bits ; o weight - 9 kg; o Power consumption - 90 VxA

The development stage readiness: Introduced in production

Technical and economic effect: Replacing obsolete park universal oscilloscopes in the CIS countries. Ensuring competitiveness in the international market due to the modern scientific and technological level and relatively low cost. Possible export.

Description of the development:
()
Oscilloscope C1 - 157/3 is designed to study the periodic electrical signals by means of visual observation and measurement of amplitude and time parameters in the frequency band from 0 MHz to 120 scale screen of a cathode ray tube ( CRT) , and a single observation of periodic electrical signals, and measure their parameters using the cursors in the frequency band from 0 to 20 MHz , as well as to observe the current-voltage characteristics (CVC ) of two - and three-point using a tester components. In the digital mode, the operating mode and measured values on the display screen . Designed oscilloscope to its specifications meet the latest scientific and technical level and market requirements .

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Belarus

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: