HEAT EXCHANGER CPG-2, 5
Purpose of the development:
Designed for heating and humidifying the air blow through the use of waste gases, heat boiler gas consumption.
Recommended application field:
Industry Use: stationary heating and industrial heating and boiler room with 2 MW boilers with heat (steam generating capacity of 2.5 t / h), which consume natural gas.
Technical characteristic:
Specifications:
- Heating capacity 0.16 MW
- The cost of waste gases , cubic m . / Hr 2500
- The temperature of the combustion products
outlet , ° C 75
- The cost of air, cubic meters . / Hr 2300
- The temperature of combustion air
outlet , ° C 50
- The cost of water, which is supplied to
air heater , t / h 3
- The cost of water, which is supplied
external user , t / h 1.5
- Heating water temperature , ° C 70
- Reduction of emissions of nitrogen oxides , 40-50 %
- Aerodynamic resistance movement
the combustion products of 300 Pa.
- Aerodynamic resistance movement
air, Pa 250
- The cost of fuel saved , cubic m . / H 15
- Overall dimensions 1818x1510x2870
- Weight, kg 1992
Advantages over analogues:
Advantages over existing analogues:
- Lower height of the surface through the use of heater and air heater cross cross pin;
- Greater heating circulating water, which provides a higher degree of hydration of the blast air and a corresponding decrease in emissions of nitrogen oxides;
- Less drag.
The development stage readiness:
Ready for application
Technical and economic effect:
Applying heat exchanger provides increased fuel utilization factor of 6-8% and a reduction of nitrogen oxide emissions by 40-50%. The payback period for the installation of heat recovery, excluding environmental benefits - up to 3 years.
Information about newness of the development:
there are Ukrainian patents -- 1 items
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|